{"product_id":"enviro-grip-405fc","title":"Enviro-Grip 405Fc","description":"\u003cp\u003e\u003cstrong\u003eA 100%-solids, zero-VOC epoxy moisture barrier that holds back concrete vapor before flooring goes down.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnviro-Grip 405Fc is a 100%-solids, zero-VOC epoxy primer that works as a moisture vapor barrier over concrete slabs. Mixed 2 parts A to 1 part B, it forms a dense film that reduces moisture vapor emission rate up to 25 lb, bringing an out-of-spec slab below the 3 lb per 1000 sq ft threshold so you can protect the finish you install over it.\u003c\/p\u003e\n\u003cp\u003eUse it on concrete that failed or is at risk on a calcium chloride or relative humidity test, ahead of resilient flooring, wood, or resin coatings. Coverage is driven by the moisture reading, so test the slab first and set your spread rate accordingly. Applied as a single coat at 10 to 16 mils wet, 405Fc has a short 20-minute pot life. Mix tight batches and keep a wet edge.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage by moisture test:\u003c\/strong\u003e 150 sq ft\/gal (under 10 lb or under 85% RH), 125 sq ft\/gal (10 to 15 lb), 100 sq ft\/gal (15 to 25 lb). Default 100 sq ft\/gal if the slab is untested.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids:\u003c\/strong\u003e 100%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e zero\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix ratio:\u003c\/strong\u003e 2 parts A to 1 part B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplied:\u003c\/strong\u003e 10 to 16 mils wet film, single coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking:\u003c\/strong\u003e pot life 20 min, recoat 48 hr\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e reduces MVER up to 25 lb, below the 3 lb per 1000 sq ft threshold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cp\u003ePSI primers and finish systems, or as a moisture barrier under third-party flooring.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhen do I need a moisture barrier primer?\u003c\/strong\u003e\u003cbr\u003eWhen a calcium chloride or RH test shows the slab above the limit your flooring allows, or the slab is untested and at risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I set coverage?\u003c\/strong\u003e\u003cbr\u003eBy the moisture reading. Drier slabs cover more, wetter slabs need more product per square foot. Untested slabs default to 100 sq ft per gallon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the mix ratio?\u003c\/strong\u003e\u003cbr\u003e2 parts A to 1 part B.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the pot life?\u003c\/strong\u003e\u003cbr\u003eAbout 20 minutes. Mix small and keep moving.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen can I install flooring over it?\u003c\/strong\u003e\u003cbr\u003eAfter the 48-hour recoat and cure window. Confirm against your finish system requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDistributed and supported by Latux.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/Enviro-Grip-405Fc-Data-Sheet.pdf?v=1786629827\" target=\"_blank\" rel=\"noopener\"\u003eDownload data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"3 Gallon","offer_id":48326495174874,"sku":"PT-ENVIRO-405FC-3","price":400.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/gh-405fc.png?v=1786975810","url":"https:\/\/latuxepoxy.com\/es\/products\/enviro-grip-405fc","provider":"Latux Epoxy","version":"1.0","type":"link"}