{"product_id":"enviro-grip-ep-2sc","title":"Enviro-Grip ep#2sc","description":"\u003cp\u003e\u003cstrong\u003eA two-component epoxy primer that bites into metal flashings and stands up to medium-to-heavy traffic.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnviro-Grip ep#2sc is a two-component solvenated epoxy-polyamine penetrating primer. Side A (black) and Side B (white) mix 1 to 1 by volume and cure into a tough, chemically bonded base coat. The solvent carrier drives the resin into tight, dense substrates, so it grips where waterborne primers slip.\u003c\/p\u003e\n\u003cp\u003eReach for ep#2sc on metal flashings, transitions, and medium-to-heavy-duty traffic areas that demand more bond strength than a pedestrian primer delivers. It is the workhorse primer in the PSI system for tough surfaces. Mix only what your crew can place inside the pot life. The color shift from black and white to a uniform gray tells you the two sides are fully blended.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 300 sq ft per gallon (varies with substrate)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids:\u003c\/strong\u003e 90% by weight, 84% by volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry film:\u003c\/strong\u003e 4 ± 1 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix ratio:\u003c\/strong\u003e 1 part A to 1 part B by volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking:\u003c\/strong\u003e pot life 60 to 90 min, recoat window 16 hr\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e 100 g\/L (solvent content)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e two-part kit, 2 gallon and 10 gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e the Enviro-Grip EP#2 primer is named in Miami-Dade County, Florida NOA No. 25-0604.15 (expires 03\/06\/2031) as Enviro-Grip #2, a primer of the Flexideck C-WD waterproofing system. Listed under test specification ASTM C836.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMiami-Dade Notice of Acceptance\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eMiami-Dade County, Florida NOA No. 25-0604.15, expires 03\/06\/2031 (March 6, 2031).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEnviro-Grip ep#2sc is the low-VOC grade of PSI Enviro-Grip EP#2, the two-component liquid applied epoxy-polyamine primer that the Notice of Acceptance lists as Enviro-Grip #2 under test specification ASTM C836. The NOA covers the Flexideck C-WD waterproofing system from Polytuff Systems International as a whole on concrete decks, approved 06\/26\/2025. It is not an approval of the primer used on its own.\u003c\/p\u003e\n\u003cp\u003eThe NOA states that the system is designed to comply with the Florida Building Code including the High Velocity Hurricane Zone of the Florida Building Code, to a maximum design pressure of -502.5 psf. Enviro-Grip #2 is the primer in the approved assembly that finishes with porcelain tile. It goes onto prepared concrete at 1 gallon of mixed Part A and Part B per 300 sq ft, applied by brush or phenolic core roller, to a minimum coating thickness of 3 dry mils, and is left to become tack free and free of puddling before the base coat. New concrete must be cured 14 to 28 days. The NOA specifies Enviro-Grip #1 for the assembly without a tile topping, so confirm which assembly you are building with your Latux rep before you order.\u003c\/p\u003e\n\u003cp\u003eThe NOA also requires, at Limitation 5, that the work be done by a contractor licensed for roofing and waterproofing who is a Manufacturer Trained Qualified Applicator approved and licensed by Polytuff Systems International. Latux is on that approved applicator list, so the company that supplies the system can also install it.\u003c\/p\u003e\n\u003cp\u003eThe full Notice of Acceptance is available on request.\u003c\/p\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cp\u003ePSI membranes and topcoats over metal and high-traffic concrete.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I mix it?\u003c\/strong\u003e\u003cbr\u003eCombine Side A (black) and Side B (white) 1 to 1 by volume and blend to a uniform gray.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I prime metal with it?\u003c\/strong\u003e\u003cbr\u003eYes. ep#2sc is built for metal flashings and dense substrates as well as medium-to-heavy traffic concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the recoat window?\u003c\/strong\u003e\u003cbr\u003eUp to 16 hours. Beyond that, abrade before topcoating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long is the pot life?\u003c\/strong\u003e\u003cbr\u003e60 to 90 minutes depending on temperature. Mix in batches you can place in time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat kit sizes are available?\u003c\/strong\u003e\u003cbr\u003eA 2-gallon kit and a 10-gallon kit, each with matched A and B sides.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDistributed and supported by Latux.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/Enviro-Grip-ep2sc-Data-Sheet.pdf?v=1786629827\" target=\"_blank\" rel=\"noopener\"\u003eDownload data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"2 Gallon","offer_id":48326494748890,"sku":"PT-ENVIRO-EP2SC-2","price":146.03,"currency_code":"USD","in_stock":true},{"title":"10 Gallon","offer_id":48326494781658,"sku":"PT-ENVIRO-EP2SC-10","price":676.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/gh-ep2sc.png?v=1786975809","url":"https:\/\/latuxepoxy.com\/products\/enviro-grip-ep-2sc","provider":"Latux Epoxy","version":"1.0","type":"link"}