{"product_id":"everflow-ef-195-casting-epoxy","title":"Everflow EF-195 | Low Exotherm Epoxy Casting System | (MPC-195)","description":"\u003cp\u003e\u003cstrong\u003ePour up to 2.5 inches in a single lift and it cures crystal-clear, without the yellowing that spoils ordinary castings.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eEF-195 is a 100% solids, two-component epoxy casting system built for deep-pour work. Cast up to 2.5\" thick in one pour for river tables, encapsulations, and molds. Its long 60-minute working time and low mixed viscosity let the resin flow into tight crevices and around complex shapes while releasing trapped air, so you get a clean, void-free casting.\u003c\/p\u003e\u003cp\u003eEF-195 holds its clarity over time. It offers superior UV stability and higher film hardness than typical casting epoxies, so finished pieces stay clearer and resist ambering better than lesser resins. It is a true zero-VOC (0 g\/L) formula, which is friendlier for indoor studios and shops, and when properly mixed and cured it meets Canadian Food Inspection Agency (CFIA) requirements for direct food contact.\u003c\/p\u003e\u003cp\u003eIt is strong as well as clear. EF-195 cures to 11,900 psi compressive strength and 80-85 Shore D hardness for a hard, durable, polish-ready casting. It comes clear and tintable with pigment or metallic packs, and suits river tables, embedding and encapsulation, jewelry, and fine arts and crafts. Pour into your mold, wait 15-20 minutes, then pass a propane torch over the surface at a 45° angle to release any latent bubbles.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeep-Pour Casting (up to 2.5\"):\u003c\/strong\u003e Cast thick river-table pours, encapsulations, and molds in a single lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior UV Stability:\u003c\/strong\u003e Stays clearer and resists ambering better than ordinary casting epoxies, keeping art and tabletops looking new.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Work Time, Crystal Clear:\u003c\/strong\u003e 60-minute working time and low mixed viscosity flow into tight crevices with excellent bubble release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero VOC:\u003c\/strong\u003e 0 g\/L VOC and LEED v4 low-emitting, friendlier for indoor studios and workshops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood-Safe When Cured:\u003c\/strong\u003e Meets CFIA requirements for direct food contact when properly mixed and cured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExceptional Hardness:\u003c\/strong\u003e 11,900 psi compressive strength and 80-85 Shore D for a hard, polish-ready casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor River Tables \u0026amp; Art:\u003c\/strong\u003e River tables, embedding and encapsulation, jewelry, and arts and crafts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids Content:\u003c\/strong\u003e 100% (by weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e 0 g\/L (zero-VOC; LEED v4 compliant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e 2-component epoxy casting resin, clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Stability:\u003c\/strong\u003e Superior (vs. typical casting epoxies)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish \/ Gloss:\u003c\/strong\u003e High-gloss clear, 92.8 GU @ 60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive Strength:\u003c\/strong\u003e 11,900 psi (ASTM D695)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e 80-85 Shore D (ASTM D2240)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity:\u003c\/strong\u003e Part A 1,400-1,600 cps · Part B 150-250 cps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Time:\u003c\/strong\u003e 60 min @ 70°F \/ 50% RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Pour Depth:\u003c\/strong\u003e 2.5\" (2500 mils) per lift\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure @ 68°F:\u003c\/strong\u003e Dry to touch 72-96 hrs · Full cure ~7 days\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e ~2 sq ft at 2.5\" per 3-gallon kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit:\u003c\/strong\u003e 3-gallon (7.56 L resin A + 3.78 L hardener B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Clear (tintable with pigment \/ metallic packs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Meets CFIA requirements for direct food contact; SCAQMD 304-91\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Pour into mold; wait 15-20 min; torch at 45° to release bubbles; seal porous material first\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf Life:\u003c\/strong\u003e 1 year unopened (store 59-86°F)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Latux Epoxy \u0026 Flooring","offers":[{"title":"Default Title","offer_id":47780030152922,"sku":"MPC-195","price":215.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/EF-195_1.png?v=1780523531","url":"https:\/\/latuxepoxy.com\/products\/everflow-ef-195-casting-epoxy","provider":"Latux Epoxy","version":"1.0","type":"link"}