{"product_id":"t-shield-wc-100","title":"T-Shield WC 100","description":"\u003cp\u003e\u003cstrong\u003eA single-component, high-solids waterproofing membrane that installs at any thickness from 30 to 2,500 mils in one pass, on green concrete or cured.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eT-Shield WC-100 is a water-catalyzed, bitumen-modified, coal-tar-free urethane-polyurea membrane carried by Latux from the PSI\/Poly-Tuff line. It builds a seamless, joint-free, crack-free waterproofing layer for below-grade and between-slab work and can be applied to green concrete just 24 hours after the pour. One product covers both horizontal and vertical surfaces: order the Horizontal grade for decks, floors, and slabs, and the Vertical grade for walls, foundations, and planters where the material has to hold on a slope without sagging.\u003c\/p\u003e\n\u003cp\u003eBecause it is high-solids and cures throughout the film, WC-100 fills ponds and low spots, re-slopes drains from negative to positive, and reaches heavy dry-film builds in a single application without kettles or heat. It meets the criteria of ASTM C-836 and E-96, resists bacterial growth, and stays flexible across a wide temperature range. Typical uses include foundation walls, basements, planters, green roofs, tunnels, showers and wet areas, and plaza and promenade decks.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemistry:\u003c\/strong\u003e single-component, high-solids, water-catalyzed, bitumen-modified urethane-polyurea membrane (coal-tar free)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrades:\u003c\/strong\u003e Horizontal (self-leveling) and Vertical (non-sag)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids:\u003c\/strong\u003e 95% by weight, 94% by volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e Shore A 25 ± 5 (ASTM D-2240)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 300 ± 50 psi (ASTM D-412)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation:\u003c\/strong\u003e 650 ± 50% (ASTM D-412)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild:\u003c\/strong\u003e 30 to 2,500 mils in a single application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e min. 60 dry mils on concrete, 90 on plywood; 120 to 160 mils for extended warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e under 0.5 lb\/gal (under 60 g\/L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e meets criteria of ASTM C-836 and E-96; resistant to bacterial growth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGreen concrete:\u003c\/strong\u003e apply 24 hr after pour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 1 gallon, 5 gallon; 55-gallon drum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 12 months, factory-sealed, stored 60 to 95F; contains isocyanates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cp\u003ePrime per the datasheet with Enviro-Grip EP#2, EP#1, or PUR#555, reinforce joints and cracks with Polyester or Max Fabric tape, and mix with water (one to two quarts per 5 gallons) before applying. For hydrostatic conditions, prime first with Enviro-Grip 405FC.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Horizontal and Vertical grades?\u003c\/strong\u003e\u003cbr\u003eBoth are the same WC-100 chemistry. Horizontal is self-leveling for decks, floors, and slabs; Vertical is non-sag so it stays put on walls, foundations, and planters. Pick the grade that matches the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I really apply it over green concrete?\u003c\/strong\u003e\u003cbr\u003eYes. WC-100 can be applied to green concrete 24 hours after the pour, which pulls waterproofing forward in the schedule.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick can one coat go?\u003c\/strong\u003e\u003cbr\u003eAnywhere from 30 to 2,500 mils in a single application. It cures through the film, so you can fill low areas and re-slope to drain in one pass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I mix it with anything?\u003c\/strong\u003e\u003cbr\u003eYes. Blend with water at one to two quarts per 5-gallon pail to catalyze the cure. Do not dilute beyond that or whip air into the material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a wearing surface?\u003c\/strong\u003e\u003cbr\u003eNo. It is a waterproofing membrane, not UV stable, and cannot take direct wear or abrasion. Cover it per the system specification.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDistributed and supported by Latux.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/T-Shield-WC-100-Data-Sheet.pdf?v=1786631786\" target=\"_blank\" rel=\"noopener\"\u003eDownload data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"Horizontal 5 Gallon","offer_id":48326496452826,"sku":"PT-TS-WC100H-5","price":176.65,"currency_code":"USD","in_stock":true},{"title":"Vertical 5 Gallon","offer_id":48326496485594,"sku":"PT-TS-WC100V-5","price":184.71,"currency_code":"USD","in_stock":true},{"title":"Horizontal 1 Gallon","offer_id":48337451581658,"sku":"PT-TS-WC100H-1","price":40.71,"currency_code":"USD","in_stock":false},{"title":"Vertical 1 Gallon","offer_id":48337451614426,"sku":"PT-TS-WC100V-1","price":42.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/9425913053402__5Gallon.png?v=1786908611","url":"https:\/\/latuxepoxy.com\/products\/t-shield-wc-100","provider":"Latux Epoxy","version":"1.0","type":"link"}