{"product_id":"t-tex-325-polyester-reinforcement-fabric","title":"Tie-Tex 325 Polyester Reinforcement Fabric","description":"\u003cp\u003e\u003cstrong\u003eA non-woven polyester reinforcement fabric that bridges cracks and ties detail work together inside your fluid-applied waterproofing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eT-Tex 325 is a spun polyester reinforcing fabric that embeds directly into the wet membrane to add tensile strength, bridge shrinkage cracks, and hold detail areas together where a deck flexes and moves. Sandwiched between the base and intermediate coats, it turns a liquid membrane into a reinforced composite that resists tearing at the spots that fail first.\u003c\/p\u003e\n\u003cp\u003eUse it as full-width field reinforcement across the deck, or cut it into strips for seams, inside and outside corners, drains, penetrations, and wall-to-floor transitions. Set your base coat, lay the fabric into the wet resin, and roll it flat so the membrane bleeds through and fully saturates the weave. Overlap the edges, keep it wrinkle-free, and topcoat once it is locked down.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoll size:\u003c\/strong\u003e 40 in wide x 325 ft long\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e about 1,080 sq ft per roll before overlaps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e non-woven spun polyester reinforcement fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverlap:\u003c\/strong\u003e lap side seams 2 to 3 in and stagger the end joints\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlacement:\u003c\/strong\u003e fully embedded between the base and intermediate membrane coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e single roll\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cp\u003eEmbed it in the PSI base and intermediate membrane coats, then finish with a Top-Shield topcoat for a complete reinforced deck system.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhere do I need to reinforce?\u003c\/strong\u003e\u003cbr\u003eAt minimum, reinforce all seams, corners, drains, penetrations, and wall-to-floor transitions. Many decks also get full-coverage fabric across the entire field.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I set it into the membrane?\u003c\/strong\u003e\u003cbr\u003eLay the fabric into the wet base coat and roll it flat until the resin bleeds through and saturates the weave. No dry spots, no bridging, no wrinkles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much should I overlap?\u003c\/strong\u003e\u003cbr\u003eLap side seams 2 to 3 inches and stagger the end joints so no two seams stack on top of each other.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much fabric will I need?\u003c\/strong\u003e\u003cbr\u003eOne roll covers about 1,080 sq ft before overlaps. Buy extra for laps, corners, and detail cuts.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDistributed and supported by Latux.\u003c\/em\u003e\u003c\/p\u003e","brand":"Latux","offers":[{"title":"40 in x 325 ft Roll","offer_id":48326497861850,"sku":"PT-TIETEX-325","price":194.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/gh-tietex.png?v=1786975810","url":"https:\/\/latuxepoxy.com\/products\/t-tex-325-polyester-reinforcement-fabric","provider":"Latux Epoxy","version":"1.0","type":"link"}