{"product_id":"top-shield-alp-150","title":"Top-Shield ALP 150","description":"\u003cp\u003e\u003cstrong\u003eA single-component, economical aliphatic urethane topcoat that reseals and protects concrete and plywood decks with a UV-stable, weatherable finish.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTop-Shield ALP-150 is a single-component, moisture-cured aliphatic urethane topcoat built for pedestrian decks and for resealing existing urethane surfaces. It rolls or sprays on straight from the pail with no mixing, cures with ambient moisture, and holds excellent color retention and weatherability outdoors. With a Solar Reflective Index of 90, it helps keep coated decks cooler and cleaner.\u003c\/p\u003e\n\u003cp\u003eUse it as the finished wear layer over a PSI deck system, or to refresh a sound existing urethane coating. Apply at about 1 gallon per 100 sq ft for a 12 mil dry film, then recoat within 48 hours. It is UV stable and color-stable, so exterior balconies, walkways, and plywood decks stay looking sharp. Carried by Latux, ALP-150 is the economical topcoat choice when you need weatherability without a two-part mix.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Single-component, moisture-cured aliphatic urethane topcoat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e about 100 sq ft per gallon per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry film:\u003c\/strong\u003e 12 ± 2 mils per coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids:\u003c\/strong\u003e 80% by weight, 74% by volume (250 VOC grade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysicals:\u003c\/strong\u003e Shore A 90 ± 5, tensile 2700 psi, tear 400 pli, elongation 200%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar Reflective Index:\u003c\/strong\u003e 90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure:\u003c\/strong\u003e 16 hr between coats, recoat within 48 hr\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e 1.87 lb\/gal (225 g\/L); SC grade available at 0.83 lb\/gal (99 g\/L)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e grey shades, tan, and chocolate custom on minimum order\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 5-gallon pail (also 1-gallon can and 55-gallon drum)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cp\u003eApply over a cured PSI basecoat and membrane system, or as a resealer over sound existing urethane. Prime with Enviro-Grip 404FC where moisture or hydrostatic pressure is a concern.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo I mix anything?\u003c\/strong\u003e\u003cbr\u003eNo. ALP-150 is single-component and moisture-cured. Mix the pail on its own for about 5 minutes to a uniform color, then apply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is it used for?\u003c\/strong\u003e\u003cbr\u003ePedestrian decks on concrete and plywood, most metal, wood, and masonry surfaces, and resealing existing urethane surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many coats do I need?\u003c\/strong\u003e\u003cbr\u003eOften more than one, depending on the system spec. Apply about 1 gallon per 100 sq ft per coat and recoat within 48 hours for proper adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a low-VOC version?\u003c\/strong\u003e\u003cbr\u003eYes. ALP-150(SC) meets 150 VOC at 0.83 lb\/gal for jurisdictions with tighter limits. Confirm the grade required at your job site.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it UV stable?\u003c\/strong\u003e\u003cbr\u003eYes. It is aliphatic with excellent weatherability, good color retention, and a Solar Reflective Index of 90. Note it has limited chemical resistance and can flatten or stain over time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDistributed and supported by Latux.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.polytuffus.com\/pdf\/Topcoats\/3.4.3%20TOPSHIELD-ALP-150-190328.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDownload data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"5 Gallon","offer_id":48326497566938,"sku":null,"price":346.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/9425913675994__5Gallon.png?v=1786908619","url":"https:\/\/latuxepoxy.com\/products\/top-shield-alp-150","provider":"Latux Epoxy","version":"1.0","type":"link"}