{"product_id":"pts-e-101","title":"PTS E-101","description":"\u003cp\u003e\u003cstrong\u003eA one-part, water-cured joint sealant that guns fast, cures without mixing, and stays flexible from vertical walls to overhead details.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePTS E-101 is a single-component, 100% solids, water-curable elastomeric joint sealant for moving and non-moving joints, inside or out. It bonds to a wide range of substrates without priming, skins fast to resist jobsite dirt pickup, and cures to a durable, weather-tight seal that holds through expansion and contraction. With zero shrinkage and no solvents or odor, it is safe to run indoors and in confined spaces.\u003c\/p\u003e\n\u003cp\u003ePick the grade for the joint. E-101 NS (Non-Sag) guns into vertical, overhead, and sloped joints and holds its shape with zero slump. E-101 SL (Self-Leveling) flows out flat in horizontal joints and deck cracks. Clean and dry the joint, set a backer rod to control depth at a 2-to-1 width-to-depth ratio, and gun the sealant in. It bonds to damp masonry, tools easily, and skins in 40 to 50 minutes. Each option ships as a 12-pack case for production sealing.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e single-component, 100% solids, water-curable elastomeric joint sealant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrades:\u003c\/strong\u003e NS Non-Sag for vertical and overhead, SL Self-Leveling for horizontal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMovement:\u003c\/strong\u003e ASTM C-920, Type S, Grade NS, Class 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhysical:\u003c\/strong\u003e Shore A hardness 30 ± 3, elongation 300-400%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure:\u003c\/strong\u003e tack-free in 40-50 min, service range -40°F to 200°F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e concrete, masonry, metal, wood, PVC, EPDM, SBS mod bit, and more, no priming on most\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e black, bronze, dark bronze, limestone, stone, tan, grey, white (custom on request)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 12-pack case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUse it with\u003c\/h3\u003e\n\u003cp\u003eSeal joints, cracks, and terminations ahead of your PSI membrane, then reinforce with Max-FD Tape or T-Tex 325 where movement is heaviest.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between NS and SL?\u003c\/strong\u003e\u003cbr\u003eNS (Non-Sag) holds its shape in vertical, overhead, and sloped joints. SL (Self-Leveling) flows flat into horizontal joints and deck cracks. Both are 12-packs at the same price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a primer?\u003c\/strong\u003e\u003cbr\u003eOn most substrates, no. E-101 bonds to concrete, masonry, metal, wood, and more without priming. Prep metal first by removing rust, scale, and oils.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need dry weather to cure?\u003c\/strong\u003e\u003cbr\u003eIt is water-curable and bonds to damp masonry, but joints should be clean and free of standing water and contamination before you gun it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much movement can it handle?\u003c\/strong\u003e\u003cbr\u003eIt meets ASTM C-920 Class 25 with 300 to 400% elongation, so it moves with the joint instead of tearing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I use a backer rod?\u003c\/strong\u003e\u003cbr\u003eYes. Set a backer rod about 25% larger than the joint so the sealant seats at a 2-to-1 width-to-depth ratio and avoids three-point adhesion.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDistributed and supported by Latux.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/PTS-E-101-Data-Sheet.pdf?v=1786632736\" target=\"_blank\" rel=\"noopener\"\u003eDownload data sheet (PDF)\u003c\/a\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"NS Non-Sag (12-Pack)","offer_id":48337473831130,"sku":"PT-E101-NS-12","price":120.84,"currency_code":"USD","in_stock":true},{"title":"SL Self-Leveling (12-Pack)","offer_id":48337473863898,"sku":"PT-E101-SL-12","price":120.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0814\/3178\/9786\/files\/gh-e101.png?v=1786975811","url":"https:\/\/latuxepoxy.com\/pt\/products\/pts-e-101","provider":"Latux Epoxy","version":"1.0","type":"link"}