MÁS EN PRIMERS
Ver todos los productos
Coverage
300 to 400 sq ft per gallon at 0.4 to 0.9 mils dry
Overcoat window
90 minutes, top while tacky
VOC
under 150 g/L, single component
- Contacto indirecto con alimentos Cumple requisitos para contacto indirecto con alimentos
- LEED v4, bajas emisiones Método SCAQMD 304-91
- Bajo COV Según la ficha técnica
- Ensayado según ASTM Datos completos en la ficha técnica
- Empresa familiar desde 2004 Más de 20 años en el oficio
Premera FP1 Fusion Primer for Epoxy and Polyaspartic
$175.00
SOLICITAR COTIZACIÓN
Hable con su representante Latux para obtener el mejor precio, flete y tiempo de entrega.
Premera FP1 Fusion Primer is a single-component sol-gel primer, a coat that chemically fuses to clean, sound concrete and to existing coatings so you can prime without grinding the whole slab. It is built for installers running epoxy, metallic epoxy, and polyaspartic systems who need a fast bonding primer that stays UV stable under clear topcoats.
300-400
SQ FT/GAL
At 0.4 to 0.9 mils dry
90
MIN WINDOW
Overcoat while tacky
NO
GRINDING
On clean, sound concrete
<150
G/L VOC
Single component
A primer that bonds without a grinder
Fuses chemically
The sol-gel builds a molecular bridge to clean, sound concrete, so you prime with no grinding instead of opening the whole slab.
Works as an intercoat primer
Bonds an existing coating to your next layer, so you can recoat a floor without stripping it back to bare concrete.
Wide compatibility
Runs under epoxy, metallic epoxy, polyaspartic, and solvent-based coatings, and stays UV stable under clear tops.
Watch the window
Flashes tacky in 15 to 20 minutes at 72F and tops within a 90 minute overcoat window. Miss it and you screen and re-prime.
Technical specifications
| COVERAGE AND APPLICATION | |
| Coverage | 300 to 400 sq ft per gallon at 0.4 to 0.9 mils dry |
| Porous concrete | Two coats wet-on-wet, 2 to 3 mils each |
| Non-porous surfaces | One coat, 1 to 2 mils, 50% overlap |
| Application temperature | 45 to 104F |
| CURE AND RECOAT | |
| Tacky | 15 to 20 min at 72F |
| Touch dry | 90 min |
| Dry-through | 120 min |
| Recoat | 5 to 90 min |
| Overcoat window | 90 minutes, top while tacky |
| COMPOSITION AND COMPATIBILITY | |
| Chemistry | Single-component sol-gel, ready to use, no backroll |
| Coats over | Epoxy, metallic epoxy, polyaspartic, solvent-based. UV stable |
| Not compatible | Water-based topcoats. Use solvent-based or 100% solids over FP1 |
| New concrete under 28 days | Use Easy MVB first, coat 96 hours after pour |
| VOC | Under 150 g/L, under 1.25 lb/gal. Flash point under 77F |
| Cleanup | Acetone |
Pairs with
Prime over Premera Easy MVB on slabs with a moisture question, then follow with your epoxy, metallic, or polyaspartic and a Premera T2 topcoat. Use solvent-based or 100% solids coatings over FP1, not water-based tops.
Ordering
Ships free in the US. Add it to the cart, then add Easy MVB or a T2 topcoat in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.
Formulated for professional installers and supported by Latux.
Frequently Asked Questions
Does FP1 need grinding?
No. The sol-gel fuses chemically to clean, sound concrete, so you can prime without grinding the whole slab.
What systems does it work under?
Epoxy, metallic epoxy, polyaspartic, and solvent-based coatings, and it stays UV stable under clear tops.
Can I use it as an intercoat primer?
Yes. It bonds an existing coating to your next layer, so you can recoat without stripping to bare concrete.
What is the overcoat window?
It flashes tacky in 15 to 20 minutes at 72F and tops within a 90 minute window. Miss it and you screen and re-prime.
Is it compatible with water-based topcoats?
No. Use solvent-based or 100% solids coatings over FP1, not water-based tops.
What about new concrete?
On new concrete under 28 days, use Easy MVB first and coat 96 hours after the pour.
