Dry time
about 2 minutes
Coverage
150 to 300 sq ft per gallon
Coats
1 on tight concrete, up to 3 on absorbent slabs
- Contacto indirecto con alimentos Cumple requisitos para contacto indirecto con alimentos
- LEED v4, bajas emisiones Método SCAQMD 304-91
- Bajo COV Según la ficha técnica
- Ensayado según ASTM Datos completos en la ficha técnica
- Empresa familiar desde 2004 Más de 20 años en el oficio
Premera QuickSeal Fast-Cure Acrylic Concrete Sealer
$75.00
SOLICITAR COTIZACIÓN
Hable con su representante Latux para obtener el mejor precio, flete y tiempo de entrega.
Premera QuickSeal is a single-component acrylic sol-gel concrete sealer, a spray-down coat that dries in about two minutes and pre-seals porous concrete before a topcoat goes down. It is built for installers who want to seal and topcoat in one visit, and it doubles as a fast stain-and-seal when you add acetone-based dye.
2 MIN
DRY TIME
Seal and top same visit
150-300
SQ FT/GAL
Per gallon
2-3x
T2 COVERAGE
Stretches the topcoat
1-3
COATS
By concrete porosity
A fast pre-seal for porous concrete
Dries in about two minutes
Spray it on and walk away. The fast set lets crews seal and topcoat the same floor in one visit.
Stretches your topcoat
Pre-sealing non-densified or porous concrete lets Premera T2 lay down right and doubles or triples T2 coverage.
Doubles as stain-and-seal
Add 1 to 2 oz of acetone-based dye per gallon, seal, then top with T2 for color on porous concrete.
Coats to porosity
One coat on tight concrete, up to three coats on highly absorbent slabs.
Technical specifications
| COVERAGE AND APPLICATION | |
| Coverage | 150 to 300 sq ft per gallon |
| Application | 2 to 3 mils wet per coat, 50% overlap, 2 minutes apart |
| Coats | One on tight concrete, up to three on absorbent slabs |
| Application temperature | 45 to 105F |
| CURE | |
| Dry time | About 2 minutes |
| COMPOSITION AND OPTIONS | |
| Chemistry | Single-component acrylic sol-gel, acetone-based |
| Stain-and-seal | 1 to 2 oz acetone dye per gallon, then T2 |
| New concrete under 28 days | Use Easy MVB first |
| Cleanup | Acetone |
Pairs with
Pre-seal porous or non-densified concrete, then topcoat with Premera T2. On slabs under 28 days old, prime with Premera Easy MVB first.
Ordering
Ships free in the US. Add it to the cart, then add a T2 topcoat or Easy MVB in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.
Formulated for professional installers and supported by Latux.
Frequently Asked Questions
What is QuickSeal for?
It pre-seals porous or non-densified concrete before a topcoat, so crews can seal and topcoat the same floor in one visit.
How fast does it dry?
In about two minutes, which lets you seal and topcoat in one visit.
Does it stretch my topcoat?
Yes. Pre-sealing porous concrete lets Premera T2 lay down right and doubles or triples T2 coverage.
Can I use it to add color?
Yes. Add 1 to 2 oz of acetone-based dye per gallon, seal, then top with T2 for color on porous concrete.
How many coats do I need?
One coat on tight concrete, up to three coats on highly absorbent slabs.
What about new concrete?
On slabs under 28 days old, prime with Premera Easy MVB first.
