More in Polyaspartic & Polyurethane TopcoatsView all
EF-280Polyaspartic Top Coats EF-275Polyaspartic Top Coats EF-290Polyaspartic Top Coats PPC Krete Urethane Cement Topcoat (12 lb Kit)Urethane Cement EF-301Polyurethane Finish Coat
PPC · Kit)PPC Krete Urethane Cement Topcoat 12-lb Kit

At a glance

SKU
PPC-KRETE-TC-GRAY
Vendor
PPC
Coverage
100 to 200 sq ft per kit
Service temperature
26.5F to 185F
Pot life
15 minutes at 75F
Weight
12.0 lb
WarrantyCovered by the manufacturer warranty. Latux stocks parts and provides technical support for every machine we sell.
Technical helpParts, service and warranty claims through your Latux rep. Mon to Fri, 8 to 5 EST.Contact a pro
PPC · Urethane Cement
Email Facebook Pinterest WhatsApp

PPC Krete Urethane Cement Topcoat (12 lb Kit)

PPC Krete Topcoat is the four-component polyurethane seal coat for the Krete urethane cement system, finishing smooth matte or non-slip with a silica broadcast. It covers 100 to 200 sq ft per kit, resists impact and abrasion, and meets requirements for indirect food contact.

$72.00

Manufacturer's Suggested Retail Price. This product is sold by quote.

Color Gray
Request a quote

Authorized dealer. Talk to your Latux rep for your best price, freight, and lead time.

Prefer to talk now? (800) 413-1427

  • Acceptable for Use in USDA Inspected Facilities Manufacturer data sheet wording
  • Antimicrobial (JIS Z 2801) Antimicrobial (JIS Z 2801)
  • Low Odor Low Odor
  • ASTM Tested Full test data on the TDS
  • Family-Run Since 2004 20+ years in the trade
At a glance

PPC Krete Urethane Cement Topcoat (12 lb Kit)

PPC Krete Topcoat is the seal-and-finish coat for the Krete urethane cement floor, a four-component polyurethane coating and grout that locks in a Krete Slurry SL floor. It finishes smooth matte or, with a silica broadcast, builds the slip resistance a wet kitchen or beverage plant needs.

100-200
SQ FT PER KIT
Varies by finish
185F
MAX SERVICE
Steam and wash-down
7 DAY
FULL CURE
Light foot in 24 hours
15 MIN
POT LIFE
At 75F
What makes it work

Seals and finishes the Krete floor

Locks in the system
Goes over Krete Slurry SL to seal the floor to a smooth matte or non-slip finish and protect it from impact and abrasion.
Dial in the slip you need
Leave it smooth, or broadcast silica at about 0.4 lb per sq ft for the grip a wet kitchen floor needs.
Same tough chemistry
Shares the urethane cement chemistry of the slurry: joint-free, hygienic, and rated for service from 26.5F to 185F.
Forgiving recoat window
Over slurry less than 24 hours old and clean, no prep is needed. Past 24 hours, diamond-grind first.
Food-plant ready
Antimicrobial and meets requirements for indirect food contact.
PHYSICAL AND CHEMISTRY
Chemistry Four-component polyurethane coating and grout
Finish Smooth matte or non-slip
Service temperature 26.5F to 185F
Colors Gray, Red, Yellow, Green, Cream, Light Gray
Antimicrobial Yes
APPLICATION AND CURE
Coverage 100 to 200 sq ft per kit by finish
Pot life 15 minutes at 75F
Working time 23 to 27 minutes at 72F
Cure Light foot 24 hr, full chemical cure 7 days
Apply temperature Not below 50F, keep floor above 40F for first 24 hr
Recoat window Over slurry under 24 hr and clean, no prep; over 24 hr, diamond-grind
Non-slip option Broadcast silica about 0.4 lb per sq ft
Cleanup Toluene or xylene before cure
COMPLIANCE
Food contact Meets requirements for indirect food contact
Kit to floor

Build the complete system.

What comes in the box, and what goes under and over it. Add any step to your cart from here.

In the kit

  • Complete four-component 12 lb topcoat kit, all parts pre-measured to mix whole
  • Covers 100 to 200 sq ft per kit depending on finish and texture
  • Choice of six colors: Gray, Red, Yellow, Green, Cream, and Light Gray

Pairs with

Goes over a PPC Krete Urethane Slurry SL floor. Broadcast silica aggregate into the topcoat for slip resistance, and keep xylene on hand to clean tools before the coating cures.

What does Krete Topcoat do?

It goes over Krete Slurry SL to seal the floor to a smooth matte or non-slip finish and protect it from impact and abrasion.

How do I make it non-slip?

Leave it smooth, or broadcast silica at about 0.4 lb per sq ft for the grip a wet kitchen floor needs.

What is the recoat window over the slurry?

Over slurry less than 24 hours old and clean, no prep is needed. Past 24 hours, diamond-grind first.

How far does a kit go?

100 to 200 sq ft per kit depending on finish and texture.

When is it fully cured?

Light foot traffic in 24 hours and full chemical cure in 7 days.

Is it food-plant ready?

It is antimicrobial and meets requirements for indirect food contact.

Complete the system