MORE IN ACCESSORIES
View all products
15 A, 2,500 W
6,000 rpm, 7 in wheel
10.8 lbs, 5/8 x 11
- Indirect Food Contact Meets requirements for indirect food contact
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Low VOC Per product data sheet
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
Metabo HPT G18ST | 7 in Angle Grinder | 15 Amp, 2,500 W, Trigger Switch
$169.00
Manufacturer's Suggested Retail Price. Equipment is sold by quote.
The Metabo HPT G18ST is a 7 inch, 15 amp angle grinder built to survive concrete dust, with a sealed armature and labyrinth construction that keep grinding debris out of the motor bearings. At 10.8 pounds it carries a 7 inch wheel without the bulk that makes big grinders hard to control overhead or along a wall.
15 A
MOTOR
2,500 W output
6,000
RPM
no load
7 in
WHEEL
5/8 x 11 spindle
10.8
POUNDS
power to weight
Built to survive concrete dust
Labyrinth construction
The housing routes air so dust and debris cannot reach the motor bearings. On concrete work that is what decides how long a grinder lasts.
Sealed armature
Armored coils with varnish protection and tape, so silica dust does not chew the windings on long prep days.
15 amp, 2,500 W output
Enough torque to hold a 7 inch cup wheel in the cut on coating removal instead of stalling every time you load it.
Spindle lock and side handle
One button locks the spindle for wheel changes, and the side handle mounts left or right for either hand.
Brushes you can reach
Carbon brushes are accessible from outside the housing, so a brush change is a field job and not a trip to a service center.
Technical specifications
| MOTOR | |
| Current | 15 A |
| Max power output | 2,500 W |
| No load speed | 6,000 rpm |
| MECHANICAL | |
| Wheel diameter | 7 in |
| Spindle thread | 5/8 x 11 |
| Weight | 10.8 lbs |
| Length | 10 15/32 in |
| DURABILITY | |
| Spindle lock | Yes |
| Labyrinth construction | Yes |
| Sealed armature | Yes |
| Warranty | 1 year tool warranty |
In the box
- G18ST 7 inch angle grinder
- Side handle, mounts left or right
- Two wrenches
Pairs with
Fit a 7 inch diamond cup wheel for coating removal and slab profiling, or a turbo cup for faster stock removal on hard concrete. Pair it with a dust shroud and a HEPA extractor to keep silica under control on interior work.
Ordering
Latux sells the Metabo HPT G18ST by quote so you get the best price and lead time for your job. Call or message your rep and we confirm current pricing and availability. Equipment is quoted separately from shipping. Price shown is for reference.
Supplied and supported by Latux.
Frequently Asked Questions
What size wheel does it take?
7 inch, on a 5/8 x 11 spindle, at 6,000 rpm no load.
Is it built for concrete dust?
Yes. Labyrinth construction keeps debris out of the motor bearings and the armature is sealed with varnish protection and tape, which is the failure point on most grinders used for slab prep.
How heavy is it?
10.8 pounds, which is light for a 7 inch grinder and is the reason it stays controllable along walls and overhead.
Can I change the brushes myself?
Yes. The carbon brushes are accessible from outside the housing, so a brush change does not need a service center.
What comes in the box?
The grinder, a side handle that mounts on either side, and two wrenches. It carries a 1 year tool warranty.
Related Products
Wooster Big Ben 18 in. Roller Frame
$19.99
Metabo WEV 15-125 HT | 5 in Variable Speed Angle Grinder | 120V, 13.5 A, Polishing Rated
$219.00
Latux Flat Squeegee
$24.99
Wooster 18 in. Microfiber Roller Covers, 3/8 in. Nap (6-Pack)
$59.99
Wooster 18 in. Microfiber Roller Cover, 3/8 in. Nap (Single)
$9.99
Latux Nitrile 5 Mil Black Industrial Gloves
$14.99
Spike Shoes (Epoxy Installer Cleats)
$24.99