Latux Flat Squeegee

The Latux Flat Squeegee spreads 100% solids epoxy, polyaspartic, and self-leveling floor coatings evenly across concrete. A red rubber blade on a riveted steel backing holds a straight edge through a full pour, and the socket handle threads onto an extension pole. Choose 12, 18, or 24 in.

Vendor: Latux

SKU: SQUEEGEE-12

Barcode:

Availability: In stock

Product type: Accessories

$35.00

Size: 12 in 12 in 18 in 24 in

Quantity

Product subtotal: $35.00

REQUEST A QUOTE

Talk to your Latux rep for your best price, freight, and lead time.

The Latux Flat Squeegee is a pro-grade epoxy squeegee, built to spread 100% solids epoxy, polyaspartic, and self-leveling floor coatings evenly across concrete. A red rubber blade rides on a riveted steel backing plate, so it holds a straight edge through a full pour instead of flexing out like the light blades sold at Home Depot or Lowe's. The socket handle is threaded for a standard extension pole, and it comes in three widths so you can match the tool to the slab.

3

WIDTHS

12, 18 and 24 in

RUBBER

RED BLADE

Non-marking

STEEL

BACKING PLATE

Riveted, holds a line

POLE

READY SOCKET

Work standing up

Which width do you need?

Wider spreads faster but demands a steadier pull and enough material on the floor to stay ahead of the edge. Most crews carry a wide blade for the open floor and a 12 in for detail work.

12 in · 1.15 lb

TIGHT SPACES AND DETAIL

Closets, bathrooms, laundry rooms, stair landings, and cutting in along walls and around obstacles. Also the one to grab for small patch and repair pours.

18 in · 1.4 lb

THE ALL-ROUNDER

The default for a single-car garage or one room. Best balance of coverage and control, and the easiest width to keep a consistent pull on a slab that is not perfectly flat.

24 in · 1.5 lb

OPEN FLOOR, FEWEST PASSES

Two and three-car garages, warehouse bays, and showrooms. Covers twice the ground per pull of the 12 in, so you spend less of the pot life spreading.

Built for professional floor installs

Built for pro coatings

Handles 100% solids epoxy and polyaspartic without dragging or flexing out like a hardware-store blade.

Red rubber on a steel backing

The rubber blade is riveted to a steel plate that keeps the edge straight under load, so the film stays even instead of scalloping where the blade bows.

Threaded pole socket

The socket grip is threaded for a standard extension pole, so you can spread a whole slab standing up instead of on your knees.

Even, controlled spread

The rigid flat blade moves high-viscosity material smoothly so you control film build and cut waste before back-rolling.

Non-marking blade

Rubber will not scuff or streak the substrate, which matters on light-colored and clear-coated floors.

Pairs with a back-roller

Spread with the squeegee, then back-roll with an 18 in epoxy roller cover for a uniform finish across the floor.

Specifications

SIZES AND WEIGHT
12 in	1.15 lb shipped
18 in	1.4 lb shipped
24 in	1.5 lb shipped
CONSTRUCTION
Blade	Red rubber, flat, non-marking
Backing	Riveted steel plate
Handle	Plated socket with ribbed grip, threaded for an extension pole
Pole	Not included
USE
Materials	100% solids epoxy, polyaspartic, urethane, self-leveling coatings
Compatible with	All pourable Everflow systems
Role	Spread and set film thickness before back-rolling

How to use it

Pour a ribbon of mixed material onto the prepared slab and pull it out with the squeegee held at a low angle, working in sections and keeping a wet edge. Then back-roll the same section in one direction to even the film and release trapped air. Scrape and wipe the blade down before the material sets; once epoxy cures on the rubber it will not pull a clean line again.

Ordering

Ships free in the US. Pick your width above, then add rollers, a spike roller, or your coating in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.

Built for professional installers and supported by Latux.

Product Specifications

SKUSQUEEGEE-12

VendorLatux

Product TypeAccessories

Available Options3 variants

Weight1.15 lb

Service & Support

Warranty

Latux stands behind every product. If a product arrives defective or does not perform to its published specifications, we replace it. Contact us with your order details and we will make it right.

Technical Assistance

Our technical team is available to assist with product questions, installation guidance, mix ratios, and job-site troubleshooting, Mon-Fri 8am-5pm EST.

Contact a Pro

Frequently Asked Questions

Do you ship nationwide?

Yes. We ship to all 50 states via standard ground and expedited freight. Contact us for international shipping inquiries.

What is your return policy?

We do not accept returns. If your order arrives damaged or we shipped the wrong item, we replace it free of charge. Report it within 48 hours of delivery with clear photos or video, and approved replacements are issued within 7 to 10 days. Manufacturing defects are covered separately under our Limited Warranty. Full terms are in our Replacement Policy.

Do you offer contractor or bulk pricing?

Yes. We offer tiered contractor pricing and distributor accounts. Contact our sales team with your company information and typical order volume to get set up.

Is technical support available?

Our technical team is available Monday to Friday 8am to 5pm EST by phone and email for installation guidance, system specs, and job-site support.