MORE IN URETHANE CEMENT SYSTEMS
View all products
Compressive strength
9,050 psi
Service temperature
26.5F to 185F
Coverage
35 sq ft at 1/8 inch per kit
- Indirect Food Contact Meets requirements for indirect food contact
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Low VOC Per product data sheet
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
PPC Krete Urethane Slurry SL Cement Floor System (44 lb Kit)
$123.09
REQUEST A QUOTE
Talk to your Latux rep for your best price, freight, and lead time.
PPC Krete Slurry SL is a self-leveling urethane cement floor, a four-component polyurethane mortar built to survive wash-down kitchens, freezers, and constant cleaning. It is made for food prep, beverage plants, breweries, pharma, and cold storage that need a smooth, easy-clean urethane cement floor that shrugs off heat, cold, and chemicals.
9,050
PSI COMPRESSIVE
Heavy plant traffic
185F
MAX SERVICE
Steam and hot wash-down
0%
WATER ABSORPTION
Smooth and hygienic
5 DAY
FULL CURE
Foot traffic in 12 hours
Built for wash-down food plants
Self-levels smooth and matte
Poured at 1/8 to 3/16 inch, it flows out to a smooth, easy-clean matte surface with no joints, the reason it lives in kitchens, breweries, and cold storage.
Handles thermal shock
It holds up to 185F and takes cold to 26.5F, so steam, hot wash-down, and freezers do not crack or lift the floor.
Whole-kit mix, every time
All four components go together in one shot, with 23 to 27 minutes of working time at 72F. Do not split or proportion a kit.
Fast return to service
Foot traffic in 12 hours, heavy traffic in 24 hours, and full chemical cure in 5 days at 72F.
Food-plant ready
Antimicrobial and meets requirements for indirect food contact, and the slab needs no moisture testing before it goes down.
Technical specifications
| PHYSICAL AND CHEMISTRY | |
| Chemistry | Four-component polyurethane cement (urethane mortar) |
| Finish | Smooth matte |
| Water absorption | 0% |
| Colors | Gray, Red, Yellow, Green, Cream, Light Gray |
| MECHANICAL | |
| Compressive strength | 9,050 psi |
| Flexural strength | 5,200 psi |
| Bond strength | Over 400 psi |
| Service temperature | 26.5F to 185F, thermal-shock resistant |
| APPLICATION AND CURE | |
| Thickness | 1/8 to 3/16 inch |
| Coverage | 35 sq ft at 1/8 inch, 23 sq ft at 3/16 inch per kit |
| Working time | 23 to 27 minutes at 72F |
| Cure | Foot 12 hr, heavy 24 hr, full chemical cure 5 days |
| Surface prep | Shotblast to CSP 2 to 3, not asphalt or painted surfaces |
| Non-slip option | Broadcast silica about 0.4 lb per sq ft |
| COMPLIANCE | |
| Food contact | Meets requirements for indirect food contact |
| Antimicrobial | Yes |
| Moisture testing | Not required before install |
In the kit
- Complete four-component 44 lb kit, all parts pre-measured to mix whole
- Covers 35 sq ft at 1/8 inch or 23 sq ft at 3/16 inch
- Choice of six colors: Gray, Red, Yellow, Green, Cream, and Light Gray
Pairs with
Seal and finish the floor with PPC Krete Urethane Cement Topcoat, and broadcast silica aggregate at about 0.4 lb per sq ft into the topcoat for a non-slip surface. Mix with a box mixer and place with a notched squeegee and spike shoes.
Ordering
Krete Slurry SL is not available for online checkout right now. Contact your Latux rep for current pricing, freight, lead time, and the kit count to cover your square footage.
Formulated for professional installers and supported by Latux.
Frequently Asked Questions
Where is Krete Slurry SL used?
Food prep, beverage plants, breweries, pharma, and cold storage that need a smooth, easy-clean wash-down floor.
How is the kit mixed?
All four components go together in one shot with 23 to 27 minutes of working time at 72F. Do not split or proportion a kit.
How thick is it poured and how far does a kit go?
Poured at 1/8 to 3/16 inch, covering 35 sq ft at 1/8 inch or 23 sq ft at 3/16 inch per kit.
What temperatures can it take?
It holds up to 185F and takes cold to 26.5F, so steam, hot wash-down, and freezers do not crack or lift the floor.
When can I return to service?
Foot traffic in 12 hours, heavy traffic in 24 hours, and full chemical cure in 5 days at 72F.
Is it food-plant ready?
It is antimicrobial and meets requirements for indirect food contact, and the slab needs no moisture testing before install.
