MORE IN POLYASPARTIC & POLYURETHANE TOPCOATS
View all products
Coverage
100 to 200 sq ft per kit
Service temperature
26.5F to 185F
Pot life
15 minutes at 75F
- Indirect Food Contact Meets requirements for indirect food contact
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Low VOC Per product data sheet
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
PPC Krete Urethane Cement Topcoat (12 lb Kit)
$79.09
REQUEST A QUOTE
Talk to your Latux rep for your best price, freight, and lead time.
PPC Krete Topcoat is the seal-and-finish coat for the Krete urethane cement floor, a four-component polyurethane coating and grout that locks in a Krete Slurry SL floor. It finishes smooth matte or, with a silica broadcast, builds the slip resistance a wet kitchen or beverage plant needs.
100-200
SQ FT PER KIT
Varies by finish
185F
MAX SERVICE
Steam and wash-down
7 DAY
FULL CURE
Light foot in 24 hours
15 MIN
POT LIFE
At 75F
Seals and finishes the Krete floor
Locks in the system
Goes over Krete Slurry SL to seal the floor to a smooth matte or non-slip finish and protect it from impact and abrasion.
Dial in the slip you need
Leave it smooth, or broadcast silica at about 0.4 lb per sq ft for the grip a wet kitchen floor needs.
Same tough chemistry
Shares the urethane cement chemistry of the slurry: joint-free, hygienic, and rated for service from 26.5F to 185F.
Forgiving recoat window
Over slurry less than 24 hours old and clean, no prep is needed. Past 24 hours, diamond-grind first.
Food-plant ready
Antimicrobial and meets requirements for indirect food contact.
Technical specifications
| PHYSICAL AND CHEMISTRY | |
| Chemistry | Four-component polyurethane coating and grout |
| Finish | Smooth matte or non-slip |
| Service temperature | 26.5F to 185F |
| Colors | Gray, Red, Yellow, Green, Cream, Light Gray |
| Antimicrobial | Yes |
| APPLICATION AND CURE | |
| Coverage | 100 to 200 sq ft per kit by finish |
| Pot life | 15 minutes at 75F |
| Working time | 23 to 27 minutes at 72F |
| Cure | Light foot 24 hr, full chemical cure 7 days |
| Apply temperature | Not below 50F, keep floor above 40F for first 24 hr |
| Recoat window | Over slurry under 24 hr and clean, no prep; over 24 hr, diamond-grind |
| Non-slip option | Broadcast silica about 0.4 lb per sq ft |
| Cleanup | Toluene or xylene before cure |
| COMPLIANCE | |
| Food contact | Meets requirements for indirect food contact |
In the kit
- Complete four-component 12 lb topcoat kit, all parts pre-measured to mix whole
- Covers 100 to 200 sq ft per kit depending on finish and texture
- Choice of six colors: Gray, Red, Yellow, Green, Cream, and Light Gray
Pairs with
Goes over a PPC Krete Urethane Slurry SL floor. Broadcast silica aggregate into the topcoat for slip resistance, and keep xylene on hand to clean tools before the coating cures.
Ordering
Krete Topcoat is not available for online checkout right now. Contact your Latux rep for current pricing, freight, lead time, and the topcoat quantity to match your slurry order.
Formulated for professional installers and supported by Latux.
Frequently Asked Questions
What does Krete Topcoat do?
It goes over Krete Slurry SL to seal the floor to a smooth matte or non-slip finish and protect it from impact and abrasion.
How do I make it non-slip?
Leave it smooth, or broadcast silica at about 0.4 lb per sq ft for the grip a wet kitchen floor needs.
What is the recoat window over the slurry?
Over slurry less than 24 hours old and clean, no prep is needed. Past 24 hours, diamond-grind first.
How far does a kit go?
100 to 200 sq ft per kit depending on finish and texture.
When is it fully cured?
Light foot traffic in 24 hours and full chemical cure in 7 days.
Is it food-plant ready?
It is antimicrobial and meets requirements for indirect food contact.
