MORE IN 2-CAR GARAGE EPOXY KIT
View all products
Solids
100%
Compressive
6,200 psi
Food Contact
Indirect (cured)
- Indirect Food Contact Meets requirements for indirect food contact
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Low VOC Per product data sheet
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
Everflow EF-100 | Epoxy Resin Flooring Kit (3gal)
Vendor:
Latux Epoxy & Flooring
SKU:
EF-100
Availability:
In stock
Product type:
Epoxy Floor Coatings
$169.15
REQUEST A QUOTE
Talk to your Latux rep for your best price, freight, and lead time.
EF-100 is Everflow's flagship 100% solids epoxy floor coating, a 2-component, self-leveling base coat that pours out into a smooth, mirror-gloss floor and bonds tightly to prepared concrete or existing epoxy. It works as a protective floor coating, a high-build primer, or a patching binder for warehouses, garages, hangars, showrooms, and food processing plants.
100%
SOLIDS
Zero shrink, full build
6,200
PSI
Compressive strength
93.2
GU GLOSS
High-gloss at 60 degrees
<50
G/L VOC
LEED v4 low-emitting
Built to take industrial traffic
100% solids, self-leveling
Flows out smooth and high-build with no shrinkage, so one product handles coating, priming, patching, and resurfacing.
Heavy-duty mechanicals
6,200 psi compressive, 5,500 psi tensile, 80 to 85 Shore D, and 0.1 g Taber abrasion loss stand up to industrial traffic.
Cycloaliphatic clarity
The cycloaliphatic formula reduces the water spotting and amine blushing that cloud ordinary epoxies, for a cleaner, more consistent cure.
High coverage and value
Plan on 350 to 400 sq ft per 3-gallon kit on a typical one-coat floor. As a primer at 8 to 10 mils it stretches to 480 to 600 sq ft; as a heavier wear coat at 12 to 24 mils, 200 to 400 sq ft.
Low VOC and food-plant rated
Under 50 g/L VOC with Class A fire performance, 0 flame spread and 15 smoke developed, and it meets requirements for indirect food contact.
Why 100% solids matters
| LATUX 100% SOLIDS EPOXY | HARDWARE-STORE EPOXY PAINT (WATER-BASED) | |
| Solids content | 100%, the whole kit becomes floor | 30 to 50%, the rest evaporates |
| Dry film thickness per coat | 10 mils or more per coat | 2 to 3 mils per coat |
| Hot tire pickup | Resists hot tire pickup | Common failure point |
| Expected life in a garage | Years of service with proper prep | 1 to 2 years typical |
| True cost per year of service | Lower over the life of the floor | Looks cheap up front, costs more in redos |
Technical specifications
| PHYSICAL AND CHEMISTRY | |
| Solids content | 100% by weight |
| Chemistry | Cycloaliphatic epoxy, 2-component |
| Finish / gloss | 93.2 GU at 60 degrees |
| Color | Clear, white, beige, black, light grey, medium grey |
| MECHANICAL | |
| Compressive strength | 6,200 psi (ASTM D695) |
| Tensile strength | 5,500 psi (ASTM D638) |
| Elongation at break | 5% (ASTM D638) |
| Hardness | 80 to 85 Shore D (ASTM D2240) |
| Taber abrasion | 0.1 g loss (CS-17, ASTM D4060) |
| Pull-off adhesion | Over 363 psi, substrate failure (ASTM D7234) |
| Slip resistance (DCOF) | About 0.42 wet, 0.92 dry (ASTM E303-93) |
| Fire (CAN/ULC S102.2) | 0 flame spread, 15 smoke developed |
| APPLICATION AND CURE | |
| Coverage | Typical floor 350 to 400 sq ft per kit; primer 8 to 10 mils, 480 to 600 sq ft; wear coat 12 to 24 mils, 200 to 400 sq ft |
| Working time | 30 to 40 min at 70 degrees F, 50% RH |
| Cure at 68 degrees F | Recoat 18 to 24 hr, foot about 1 day, vehicle about 2 days, full about 7 days |
| Surface prep | Diamond grind concrete to ICRI CSP-2 |
| Application | Pour, rubber squeegee, back-roll with 10 mm nap |
| Kit | 3-gallon, 7.56 L resin A plus 3.78 L hardener B |
| COMPLIANCE | |
| VOC | Under 50 g/L (LEED v4, SCAQMD 304-91) |
| Food contact | Meets requirements for indirect food contact |
| Shelf life | 1 year unopened, store 59 to 86 degrees F |
In the kit
- 3-gallon kit: 7.56 L resin (Part A) plus 3.78 L hardener (Part B)
- Pre-measured 2 to 1 mix ratio by volume
- Six stock colors: clear, white, beige, black, light grey, and medium grey
Pairs with
Finish with an Everflow polyaspartic or urethane topcoat when you need added gloss, color, or UV stability. Diamond grind the slab to ICRI CSP-2 first, then pour, squeegee, and back-roll for a smooth base coat.
Ordering
Ships free in the US. Add your kit to the cart, then add primer, pigments, or a topcoat in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.
Formulated for professional installers and supported by Latux.
Frequently Asked Questions
How much floor will one EF-100 kit cover?
Plan on 350 to 400 sq ft for a typical one-coat floor. A 3-gallon kit stretches to 480 to 600 sq ft as a primer (8 to 10 mils) or covers 200 to 400 sq ft as a heavier wear coat (12 to 24 mils), depending on concrete porosity and the profile of the slab.
How long until I can walk or drive on the floor?
At 68°F you can recoat in 18 to 24 hours, return light foot traffic in about a day, and vehicle traffic in roughly two days. Full chemical cure takes about 7 days. Warmer temperatures speed this up; cooler temperatures slow it down. Recoat within 48 hours or you'll need to sand the previous coat first.
What's the difference between EF-100, EF-150, and EF-155?
EF-100 is the standard 100% solids base coat, the all-purpose workhorse. EF-150 is the fast-curing, cold-tolerant version for tight timelines and low temperatures. EF-155 is the super-fast-cure option built for same-day metallic and chip systems.
Is EF-100 UV stable?
As an epoxy, EF-100 will discolor under prolonged UV exposure. For sunlit, outdoor, or high-light areas, finish it with an Everflow UV-stable polyaspartic or urethane topcoat such as EF-275 or EF-290.
What surface prep does EF-100 need?
Diamond-grind the concrete to an ICRI CSP-2 profile and remove all dust, oil, and contaminants. The slab should be at least 3,635 psi compressive strength, under 4% moisture, and at least 3°C above the dew point. Repair all cracks and holes before coating.
Do I need a moisture vapor barrier first?
If your slab is subject to hydrostatic pressure or high moisture vapor emission, apply a moisture vapor barrier such as Everflow EF-160 before EF-100. Coating a high-moisture slab without a barrier risks delamination.
Is EF-100 food-safe?
It meets requirements for indirect food contact and use in food-processing plants when properly mixed, applied, and cured.
What is the working time after mixing?
About 30 to 40 minutes at 70°F and 50% humidity. Mix Part B into Part A for no more than 1 minute on a low-speed drill, then pour immediately. Never let mixed product sit in the bucket, as it will heat up and cure rapidly.
Related Products
Everflow EF-150 | Fast Cure Epoxy Resin Kit (3gal)
$198.00
EF-155 | Super Fast Cure Epoxy Resin Flooring Kit For Metallics (3 Gal) | 100% Solids
$210.00
Everflow EF-275 | Solvent Based Polyaspartic (2gal)
$181.99
Everflow EF-280 | Polyaspartic Coating Kit (3gal)
$275.99
Everflow EF-290 | High Solids Solvent Polyaspartic (2gal)
$232.50
Metallic Epoxy Pigment (160 Grams)
$40.00
Home and Industrial Flakes for Basement, Shop, and Garage Floors, 25-Pound Box
$90.00
