MORE IN 2-CAR GARAGE EPOXY KIT
View all products
Finish
UV-Stable Clear
Coverage
600 sq ft / kit
Recoat
2 to 4 hrs
- Indirect Food Contact Meets requirements for indirect food contact
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Low VOC Per product data sheet
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
Everflow EF-280 | Polyaspartic Coating Kit (3gal)
Vendor:
Latux Epoxy & Flooring
SKU:
POLYFLOW-280
Availability:
In stock
Product type:
Polyaspartic Top Coats
$275.99
REQUEST A QUOTE
Talk to your Latux rep for your best price, freight, and lead time.
EF-280 is Everflow's UV-stable polyaspartic topcoat, a solvent-based, 2-component aliphatic polyaspartic polyurea clear coat that seals and protects solid-color coatings and vinyl flake floors. It lays down a thin-to-medium build clear layer that will not yellow or chalk, and the larger 3-gallon kit covers more floor per unit for crews that want limited downtime.
89.5
GU GLOSS
Crystal-clear high gloss
0.03
G TABER LOSS
Superior abrasion resistance
40%
ELONGATION
Flexes and resists cracking
600
SQ FT
Per 3-gallon kit over coating
UV-stable clear topcoat that seals the finish
UV-stable clear finish
Aliphatic polyaspartic chemistry resists yellowing and chalking for a crystal-clear, high-gloss finish that lasts indoors and out.
High coverage, 3-gallon kit
Covers up to 600 sq ft over an existing coating or 400 sq ft over vinyl flake, for more floor per kit.
Fast return to service
Recoat in 2 to 4 hours and walk on it in 4 to 8, so you can reopen the space the same day.
Superior abrasion and chemical resistance
Just 0.03 g Taber abrasion loss shields the color and flake beneath from heavy foot and cart traffic.
Flexible and tough
40% elongation at break resists cracking, with 5,150 psi tensile strength and about 0.75 DCOF wet traction.
VOC compliant and food-plant rated
Under 100 g/L VOC and LEED v4 low-emitting, and it meets requirements for indirect food contact.
Which topcoat do you need?
| TOPCOAT | EF-275 | EF-280 (this product) | EF-285 | EF-290 | EF-301 |
| Solids | 75% | 80% | 85% | 90% | 85% |
| Finish and gloss | High-gloss clear, 89.5 GU | High-gloss clear, 89.5 GU | High-gloss clear, 89.5 GU | High-gloss clear, 89.5 GU | Satin, 35 GU |
| Coverage per kit | About 400 sq ft over coating, 2-gal kit | About 600 sq ft over coating, 3-gal kit | About 400 sq ft at 8 mils, 2-gal kit | About 400 sq ft over coating, 2-gal kit | 350 to 450 sq ft, 1-gal kit |
| Recoat window | 2 to 4 hr | 2 to 4 hr | 2 to 4 hr | 2 to 4 hr | Applied as the final coat |
| Foot traffic | 4 to 8 hr | 4 to 8 hr | 4 to 8 hr | 3 to 6 hr | About 1 day |
| UV stability | UV stable, non-yellowing | UV stable, non-yellowing | UV stable, non-yellowing | UV stable, non-yellowing | UV stable, non-yellowing |
| Best for | Fast, budget-friendly clear over flake and color floors | All-around kit with the most coverage per kit | VOC-strict states, under 50 g/L, and UV-stable priming | Thickest clear coat, fewest coats | Satin-capable final finish that hides scuffs |
Technical specifications
| PHYSICAL AND CHEMISTRY | |
| Type | Solvent-based aliphatic polyaspartic polyurea, 2-component |
| Solids | 80% by weight |
| UV stability | Aliphatic, non-yellowing |
| Finish / gloss | Crystal-clear high-gloss, 89.5 GU at 60 degrees |
| Color | Crystal-clear |
| Viscosity | Part A 50 to 100 cps, Part B 600 to 800 cps |
| MECHANICAL | |
| Taber abrasion | 0.03 g loss (CS-17, ASTM D4060) |
| Elongation at break | 40% (ASTM D638) |
| Tensile strength | 5,150 psi (ASTM D638) |
| Hardness | Koenig pendulum 175 sec at 8 mils (ASTM D4366) |
| Pull-off adhesion | Over 363 psi, substrate failure (ASTM D7234) |
| Slip resistance (DCOF) | About 0.75 wet (ASTM E303-93) |
| APPLICATION AND CURE | |
| Coverage | Over coating 8 mils, about 600 sq ft; over vinyl flake 12 mils, about 400 sq ft, per 3-gallon kit |
| Working time | 20 to 25 min at 70 degrees F, 50% RH |
| Cure at 68 degrees F | Recoat 2 to 4 hr, foot 4 to 8 hr, vehicle about 1 day, full about 7 days |
| Application | 10 mm roller or squeegee over a prepared base system, not bare concrete; apply 41 to 86 degrees F |
| Kit | 3-gallon, 7.56 L resin A plus 3.78 L hardener B |
| COMPLIANCE | |
| VOC | Under 100 g/L (LEED v4, SCAQMD 304-91) |
| Food contact | Meets requirements for indirect food contact |
| Shelf life | 1 year unopened, store 59 to 86 degrees F |
In the kit
- 3-gallon kit: 7.56 L resin (Part A) plus 3.78 L hardener (Part B)
- Pre-measured 2 to 1 mix ratio by volume
- Crystal-clear base, supplied clear only
Pairs with
Apply EF-280 over a prepared solid-color coating or vinyl-flake base system to seal in the finish, not over bare concrete. It is the UV-stable topcoat that protects an Everflow epoxy floor from abrasion, chemicals, and sunlight. Because the cure is quick, mix only what you can spread in 20 to 25 minutes.
Ordering
Ships free in the US. Add your kit to the cart, then add primer or a base coat in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.
Formulated for professional installers and supported by Latux.
Frequently Asked Questions
What is EF-280 used for?
It's a UV-stable clear topcoat for a thin-to-medium build over solid-color coatings and vinyl flake (chip) systems. It seals in the finish and protects it from wear, chemicals, and sunlight. The final clear layer of a floor system, not a base coat.
How is EF-280 different from EF-275?
They share the same UV-stable polyaspartic performance. EF-280 comes in a larger 3-gallon kit, has a slightly higher solids content (80%), and is built for a thin-to-medium build with more coverage (up to 600 sq ft). EF-275 is the 2-gallon, thin-build version.
Will EF-280 turn yellow?
No, as a true aliphatic polyaspartic it resists yellowing and chalking and keeps a crystal-clear, high-gloss finish in both interior and sun-exposed applications.
How quickly can I reopen the floor?
At 68°F you can recoat in 2 to 4 hours, return foot traffic in 4 to 8 hours, and vehicle traffic in about a day. Full cure is roughly 7 days.
Can I apply EF-280 directly on concrete?
No, it's a topcoat, not recommended directly on bare concrete. Apply it over a prepared base coat or flake system, and make sure the slab has a moisture barrier to prevent delamination.
How much does one kit cover?
A 3-gallon kit covers about 600 sq ft at 8 mils over an existing coating, or about 400 sq ft at 12 mils over a vinyl flake broadcast system.
Can I tint EF-280?
No. EF-280 ships crystal clear only, and Latux does not offer a color pack for it. Build the color into the layer underneath with a solid-color base coat or a vinyl flake broadcast, then seal it with EF-280 as the clear topcoat.
Why does my polyaspartic floor show tire marks?
Rubber tires can stain a polyaspartic coating through plasticizer migration, and quick stops or starts can leave rubber burn marks. Use mats under parked vehicles where staining is a concern.
Related Products
Everflow EF-100 | Epoxy Resin Flooring Kit (3gal)
$169.15
Everflow EF-150 | Fast Cure Epoxy Resin Kit (3gal)
$198.00
EF-155 | Super Fast Cure Epoxy Resin Flooring Kit For Metallics (3 Gal) | 100% Solids
$210.00
Everflow EF-275 | Solvent Based Polyaspartic (2gal)
$181.99
Everflow EF-290 | High Solids Solvent Polyaspartic (2gal)
$232.50
Metallic Epoxy Pigment (160 Grams)
$40.00
Home and Industrial Flakes for Basement, Shop, and Garage Floors, 25-Pound Box
$90.00
