2-Car Garage Epoxy Kit
A 2-car garage runs about 400 to 500 square feet depending on the builder, and that is the size where guessing gets expensive. One EF-100 kit covers 350 to 400 square feet at a standard garage build, so a 2-car floor takes two 3-gallon base kits. Two kits give you 700 to 800 square feet of coverage, which absorbs the waste cushion and the extra material a freshly ground slab drinks up on the first pass. Measure your own slab before ordering: builder 2-car sizes vary, and 40 square feet can be the difference between comfortable and short.
What a 2-car garage floor needs
- 2 EF-100 base kits, or EF-150 / EF-155 when you need a faster recoat window
- 2 metallic pigment pods: one 160 gram pod tints one 3-gallon kit, so match pods to base kits
- 1 to 2 polyaspartic topcoat kits: one kit of EF-275 or EF-280 covers a smaller 2-car around 400 square feet, two kits for larger floors or a heavier wear course
- Flakes, optional: a 25 pound box handles a light broadcast, step up to the 40 pound box for a full broadcast floor
- Tools: a flat squeegee, an 18 inch roller with spare covers, and spike shoes
Order of work
Grind or etch, vacuum, then pour and spread the base one mixed kit at a time, keeping a wet edge between batches. Back-roll, broadcast flakes into the wet film if you are running flake, and let it cure. Scrape and vacuum the rejected flake, then roll the topcoat in one continuous pass.
Check the math against your slab with the epoxy coverage guide or the contractor material takeoff walkthrough.
Common questions
How much epoxy do I need for a 2-car garage?
Plan on two 3-gallon base kits for 400 to 500 square feet at a standard build, plus a topcoat sized to the same footage. As a thin primer coat at 8 to 10 mils, each kit stretches to 480 to 600 square feet.
Can I do half the floor one weekend and half the next?
You can, but a seam line may show where the pours meet. Most installers split the work a different way: prep day one, coat day two, so each coat goes down in a single continuous pour.
CATEGORIES
- 1-Car Garage Epoxy Kit
- 2-Car Garage Epoxy Kit
- 3-Car Garage Epoxy Kit
- Accessories
- Application Tools
- Concrete Polishing & Densifiers
- Countertop & Deep Pour Epoxy
- Crack Fillers & Specialty Products
- Cup Wheels & Diamond Tooling
- Dust Collectors & Vacuums
- Dust Extractors
- Epoxy Coatings & Kits
- Epoxy Dust and Slurry Equipment
- Epoxy Flakes & Quartz
- Epoxy Pigments
- Flake & Quartz Systems
- Floor Grinders
- Floor Grinders: Large & Industrial
- Floor Grinders: Small & Mid
- HTG Series
Filter and sort
Filter
-
Vendor:EF-100 is Everflow's flagship 100% solids epoxy floor coating, a 2-component, self-leveling base coat that pours out into a smooth, mirror-gloss floor and bonds tightly to prepared concrete or existing epoxy. It works as a protective floor coating, a high-build primer, or a patching...Regular price $169.15 USDRegular priceUnit price / per
Sale price $169.15 USDRegular price $169.15 USDRegular priceUnit price / perSale price $169.15 USD- Clear (Transparent)
- White
- Beige
- Light Grey
- Medium GreyBlack
-
Vendor:EF-150 is Everflow's fast-cure 100% solids epoxy floor coating, a 2-component, self-leveling floor built for jobs where time and temperature work against you. It recoats in as little as 6 to 8 hours and cures on a cold substrate, so winter work and tight...Regular price $198.00 USDRegular priceUnit price / per
Sale price $198.00 USDRegular price $198.00 USDRegular priceUnit price / perSale price $198.00 USD- Clear (Transparent)
- White
- Beige
- Light Grey
- Medium GreyBlack
-
Vendor:EF-155 is Everflow's super-fast-cure 100% solids epoxy floor coating, a 2-component, self-leveling base that recoats in as little as 2 to 4 hours so a crew can build a complete epoxy floor in a single day. Its clear, fast-setting base makes it a strong...Regular price $210.00 USDRegular priceUnit price / per
Sale price $210.00 USDRegular price $210.00 USDRegular priceUnit price / perSale price $210.00 USD- Clear (Transparent)
- White
- Beige
- Light Grey
- Medium GreyBlack
-
Vendor:EF-275 is Everflow's solvent-based aliphatic polyaspartic topcoat, a crystal-clear, UV-stable clear coat that seals solid-color coatings and vinyl flake floors and lets you reopen the space the same day. Built for professional installers on limited-downtime jobs, it resists yellowing and chalking while adding superior...Regular price $181.99 USDRegular priceUnit price / per
Sale price $181.99 USDRegular price $181.99 USDRegular priceUnit price / perSale price $181.99 USD -
Vendor:EF-280 is Everflow's UV-stable polyaspartic topcoat, a solvent-based, 2-component aliphatic polyaspartic polyurea clear coat that seals and protects solid-color coatings and vinyl flake floors. It lays down a thin-to-medium build clear layer that will not yellow or chalk, and the larger 3-gallon kit covers...Regular price $275.99 USDRegular priceUnit price / per
Sale price $275.99 USDRegular price $275.99 USDRegular priceUnit price / perSale price $275.99 USD -
Vendor:EF-290 is Everflow's fast-curing, high-build polyaspartic topcoat, the highest-solids clear coat in the line at 90 percent, so it lays down a thicker, more protective film over solid-color coatings and vinyl flake floors in fewer coats. Built for professional installers on limited-downtime jobs, it...Regular price $232.50 USDRegular priceUnit price / per
Sale price $232.50 USDRegular price $232.50 USDRegular priceUnit price / perSale price $232.50 USD -
Vendor:Metallic Epoxy Pigment is a pre-measured 160 gram pearlescent pigment pod that tints a full 3-gallon kit of clear 100% solids epoxy base coat, so every batch carries the same metallic load with no scale and no guesswork. This pearlescent pigment builds a deep,...Regular price From $40.00 USDRegular priceUnit price / per
Sale price From $40.00 USDRegular price From $40.00 USDRegular priceUnit price / perSale price From $40.00 USD- 800 SATIN WHITE
- 801 INTENSE SPARKLE WHITE
- 802 SILVER PEARL
- 803 GLITTER YELLOW
- 804 DARK YELLOW805 FRESH GREEN806 APPLE GREEN807 APPLE GREEN LIGHT808 DARK GREEN809 JUNGLE GREEN811 BRIGHT GREEN812 DARK GREEN GOLD813 GREEN BROWN815 PEACOCK GREEN816 FLASH BLUE817 BLUE GREEN818 GOLD BLUE819 COBALT BLUE823 CAMBRIDGE BLUE825 DARK PURPLE826 BRIGHT VIOLET829 IRIDESCENT VIOLET831 MAGIC VIOLET836 FLASH WINE RED838 PEACHBLOW839 PEACH PINK841 SAFFRON842 RED BROWN843 BRONZE844 COFFEE845 ROYAL GOLD848 SHIMMER PT GOLD849 FLASH PT GOLD851 DEEP BROWN852 LUSTER GREY854 SILVER GREY METALLIC855 BLACK PEARL METALLIC856 RED BARIUM LAKE872 PINK
-
Vendor:Home and Industrial Flakes are professional vinyl broadcast chips for full-broadcast epoxy floor flake systems, a durable decorative finish for garage, basement, shop, and light commercial floors. At a full broadcast to rejection this 25 pound box of 1/4 inch epoxy floor flakes covers...Regular price $90.00 USDRegular priceUnit price / per
Sale price $90.00 USDRegular price $90.00 USDRegular priceUnit price / perSale price $90.00 USD- Basalt
- Cabin Fever
- Carbon
- Domino
- NightfallOrbitOutbackShoreline
-
Vendor:Home and Industrial Flakes are professional vinyl broadcast chips for full-broadcast epoxy floor flake systems, sized here in a 40 pound bulk box for larger residential pours, multi-bay garages, and light commercial floors. At a full broadcast to rejection this bulk box of 1/4...Regular price $175.00 USDRegular priceUnit price / per
Sale price $175.00 USDRegular price $175.00 USDRegular priceUnit price / perSale price $175.00 USD- Basalt
- Cabin Fever
- Carbon
- Domino
- NightfallOrbitOutbackShoreline
-
Vendor:The Latux Flat Squeegee is a pro-grade epoxy squeegee, built to spread 100% solids epoxy, polyaspartic, and self-leveling floor coatings evenly across concrete. It gives installers the control and durability the light squeegees at Home Depot or Lowe's cannot, so you set film thickness...Regular price $24.99 USDRegular priceUnit price / per
Sale price $24.99 USDRegular price $24.99 USDRegular priceUnit price / perSale price $24.99 USD -
Vendor:The Wooster Big Ben 18 inch roller frame is a heavy-duty handle for running 18 inch covers on 100% solids epoxy and polyaspartic floor coatings. It carries the weight of full-build material without flexing and holds even pressure across the full width, so back-roll...Regular price $19.99 USDRegular priceUnit price / per
Sale price $19.99 USDRegular price $19.99 USDRegular priceUnit price / perSale price $19.99 USD -
Vendor:Wooster 18 in microfiber roller covers are the professional standard for back-rolling epoxy base coats and applying polyaspartic topcoats. The lint-free fabric keeps fiber out of a high-gloss film, and the 18 in width covers more floor per pass than the general-purpose covers at...Regular price $59.99 USDRegular priceUnit price / per
Sale price $59.99 USDRegular price $59.99 USDRegular priceUnit price / perSale price $59.99 USD -
Vendor:Spike shoes let you walk across a fresh epoxy pour to check, back-roll, or broadcast flake without leaving flat-soled footprints in the wet film. They strap over your existing footwear, and the spiked sole spreads your weight across dozens of fine points so contact...Regular price $24.99 USDRegular priceUnit price / per
Sale price $24.99 USDRegular price $24.99 USDRegular priceUnit price / perSale price $24.99 USD




