MORE IN 2-CAR GARAGE EPOXY KIT
View all products
Finish
UV-Stable Clear
Recoat
2 to 4 hrs
Abrasion
0.03 g (Taber)
- Indirect Food Contact Meets requirements for indirect food contact
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Low VOC Per product data sheet
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
Everflow EF-275 | Solvent Based Polyaspartic (2gal)
Vendor:
Latux Epoxy & Flooring
SKU:
POLYFLOW-275
Availability:
In stock
Product type:
Polyaspartic Top Coats
$181.99
REQUEST A QUOTE
Talk to your Latux rep for your best price, freight, and lead time.
EF-275 is Everflow's solvent-based aliphatic polyaspartic topcoat, a crystal-clear, UV-stable clear coat that seals solid-color coatings and vinyl flake floors and lets you reopen the space the same day. Built for professional installers on limited-downtime jobs, it resists yellowing and chalking while adding superior abrasion, chemical, and UV protection over the color and flake beneath.
75%
SOLIDS
Builds a protective clear film
0.03
G TABER LOSS
Low abrasion wear (CS-17)
40%
ELONGATION
Flexes without cracking
89.5
GU GLOSS
Crystal-clear high-gloss
Same-day clear coat for flake and color floors
UV-stable clear finish
Aliphatic polyaspartic chemistry resists yellowing and chalking for a crystal-clear, high-gloss finish that holds up indoors and out.
Same-day return to service
Recoat in 2 to 4 hours and walk on it in 4 to 8, so you can reopen the space the same day.
Superior abrasion and chemical resistance
Just 0.03 g of Taber abrasion loss protects the color and flake beneath from foot and cart traffic.
Built for flake and color systems
The go-to thin clear topcoat over vinyl flake broadcast (chip) floors and solid-color coatings.
Flexible and tough
40% elongation at break resists cracking, with 5,150 psi tensile and about 0.75 DCOF wet traction.
Which topcoat do you need?
| TOPCOAT | EF-275 (this product) | EF-280 | EF-285 | EF-290 | EF-301 |
| Solids | 75% | 80% | 85% | 90% | 85% |
| Finish and gloss | High-gloss clear, 89.5 GU | High-gloss clear, 89.5 GU | High-gloss clear, 89.5 GU | High-gloss clear, 89.5 GU | Satin, 35 GU |
| Coverage per kit | About 400 sq ft over coating, 2-gal kit | About 600 sq ft over coating, 3-gal kit | About 400 sq ft at 8 mils, 2-gal kit | About 400 sq ft over coating, 2-gal kit | 350 to 450 sq ft, 1-gal kit |
| Recoat window | 2 to 4 hr | 2 to 4 hr | 2 to 4 hr | 2 to 4 hr | Applied as the final coat |
| Foot traffic | 4 to 8 hr | 4 to 8 hr | 4 to 8 hr | 3 to 6 hr | About 1 day |
| UV stability | UV stable, non-yellowing | UV stable, non-yellowing | UV stable, non-yellowing | UV stable, non-yellowing | UV stable, non-yellowing |
| Best for | Fast, budget-friendly clear over flake and color floors | All-around kit with the most coverage per kit | VOC-strict states, under 50 g/L, and UV-stable priming | Thickest clear coat, fewest coats | Satin-capable final finish that hides scuffs |
Technical specifications
| PHYSICAL AND CHEMISTRY | |
| Type | Solvent-based aliphatic polyaspartic polyurea, 2-component |
| Solids | 75% by weight |
| Finish and gloss | Crystal-clear high-gloss, 89.5 GU at 60 degrees |
| Color | Crystal-clear |
| Viscosity | Part A 200 to 300 cps, Part B 50 to 100 cps |
| MECHANICAL | |
| Abrasion (Taber CS-17) | 0.03 g loss (ASTM D4060) |
| Elongation at break | 40% (ASTM D638) |
| Tensile strength | 5,150 psi (ASTM D638) |
| Pull-off adhesion | Over 363 psi, substrate failure (ASTM D7234) |
| Hardness | Koenig pendulum 175 sec at 8 mils (ASTM D4366) |
| Slip resistance (DCOF) | About 0.75 wet (ASTM E303-93) |
| APPLICATION AND CURE | |
| Working time | 20 to 25 min at 70 degrees F, 50% RH |
| Cure at 68 degrees F | Recoat 2 to 4 hr, foot 4 to 8 hr, vehicle about 1 day, full about 7 days |
| Coverage | Over coating 8 mils about 400 sq ft, over vinyl flake 12 mils about 267 sq ft per 2-gallon kit |
| Application | 10 mm roller or squeegee over a prepared base system, not bare concrete |
| Apply temperature | 41 to 86 degrees F |
| COMPLIANCE | |
| VOC | Under 100 g/L (LEED v4 low-emitting, SCAQMD 304-91) |
| Food contact | Meets requirements for indirect food contact |
| Shelf life | 1 year unopened, store 59 to 86 degrees F |
In the kit
- 2-gallon kit: 3.78 L resin (Part A) plus 3.78 L hardener (Part B)
- Two-component system, mix only what you can spread in 20 to 25 minutes
- Crystal-clear base, supplied clear only
Pairs with
Apply EF-275 over Everflow solid-color coatings or a vinyl flake broadcast system. Prime and prepare the slab first, diamond grind concrete to ICRI CSP-2, and build the base before you seal it with this polyaspartic topcoat.
Ordering
Ships free in the US. Add your kit to the cart, then add primer, flake, or a base coating in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.
Formulated for professional installers and supported by Latux.
Frequently Asked Questions
What is EF-275 used for?
It's a UV-stable clear topcoat applied over solid-color coatings and vinyl flake (chip) systems to seal in the finish and protect it from wear, chemicals, and sunlight. It's the final clear layer of a floor system, not a base coat.
Will EF-275 turn yellow?
No. As a true aliphatic polyaspartic, it resists yellowing and chalking and keeps a crystal-clear, high-gloss finish in both interior and sun-exposed applications.
How quickly can I reopen the floor?
Fast, at 68°F you can recoat in 2 to 4 hours, return foot traffic in 4 to 8 hours, and vehicle traffic in about a day. Full cure is roughly 7 days.
Can I apply EF-275 directly on concrete?
No, it's a topcoat, not recommended for use directly on bare concrete. Apply it over a prepared base coat or flake system. Make sure the slab has a moisture barrier to avoid delamination.
How much does one kit cover?
A 2-gallon kit covers about 400 sq ft at 8 mils over an existing coating, or about 267 sq ft at 12 mils over a vinyl flake broadcast system.
Can I get EF-275 in a color?
No. EF-275 ships crystal clear only, and Latux does not offer a color pack for it. Build the color into the layer underneath with a solid-color base coat or a vinyl flake broadcast, then seal it with EF-275 as the clear topcoat.
Why are there tire marks on my polyaspartic floor?
Rubber tires can stain a polyaspartic coating through plasticizer migration, and quick stops or starts can leave rubber burn marks. This is normal for clear coatings; use floor mats under vehicles where staining is a concern.
What is the working time after mixing?
About 20 to 25 minutes at 70°F. Mix only what you can spread within that window and never leave mixed product in the bucket.
Related Products
Everflow EF-100 | Epoxy Resin Flooring Kit (3gal)
$169.15
Everflow EF-150 | Fast Cure Epoxy Resin Kit (3gal)
$198.00
EF-155 | Super Fast Cure Epoxy Resin Flooring Kit For Metallics (3 Gal) | 100% Solids
$210.00
Everflow EF-280 | Polyaspartic Coating Kit (3gal)
$275.99
Everflow EF-290 | High Solids Solvent Polyaspartic (2gal)
$232.50
Metallic Epoxy Pigment (160 Grams)
$40.00
Home and Industrial Flakes for Basement, Shop, and Garage Floors, 25-Pound Box
$90.00
