More in Epoxy Floor CoatingsView all
EF-100Epoxy Floor Coatings
EF-280Polyaspartic Top Coats
PPC Epoxy 100 Clear 100% Solids Epoxy Floor Coating (3-Gal Kit)Epoxy Floor Coatings
EF-135Crack Filler
EF-MasterflowEpoxy Kits
LTX-100Epoxy Floor Coatings
MONEY COAT™ CLEAREpoxy Kits
EF-150Epoxy Floor Coatings
EF-155Epoxy Floor Coatings
EF-191Countertop Epoxy
EF-195Deep Pour Epoxy
Latux · CLEAR
At a glance
- SKU
- MC-CLR
- Vendor
- Latux
- Solids
- 100%, VOC under 30 g/L
- Compressive 18,400 psi, 80 Shore D
- Coverage
- 75 to 125 sq ft per 3-gallon kit
- Pot life
- 20 min at 75°F
- Weight
- 30.0 lb
Documents
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
Latux · Epoxy Kits
MONEY COAT™ CLEAR
100% Solids Clear Epoxy Floor Coating
MONEY COAT CLEAR is a 100% solids, two-component clear epoxy with a truly clear, colorless finish and a glass-hard surface for luxury floors over prepared concrete, metallic, and flake systems. It reaches 18,400 psi compressive strength and 80 Shore D hardness at under 30 g/L VOC, and finishes best under a UV-stable polyaspartic topcoat.
$205.00
Big job or contractor pricing? Request a quote
- Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
- Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy
New customer? Get 10% off your first order
- 100% Solids 100% Solids
- Low VOC (<30 g/L) Low VOC (<30 g/L)
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
At a glance
MONEY COAT™ CLEAR
MONEY COAT CLEAR is a 100% solids, two-component clear epoxy, a crystal-clear, colorless coating built for floors that show off what is underneath. It works as a build coat, base coat, or clear coat over a prepared concrete slab, metallic systems, and decorative flake, self-leveling into a glass-hard, high-gloss layer for luxury homes, boutique retail, and high-design garages.
100%
SOLIDS
Low VOC, under 30 g/L
18,400
PSI
Compressive strength
80
SHORE D
Surface hardness
7
DAY CURE
Full chemical cure
What makes it work
Made for floors that show off what is underneath
Crystal-clear finish
Minimal haze and no color cast, one of the more optically pure clear coats for decorative floor systems.
Glass-hard and durable
18,400 psi compressive, 8,400 psi tensile, and 80 Shore D give a hard, wear-resistant surface that protects the floor without dulling the look.
Self-leveling, seamless film
Low mixed viscosity flows out smooth for a seamless, high-gloss finish that reads like glass over the design below.
100% solids, low VOC
Maximum build per coat at under 30 g/L VOC, with strong adhesion to prepared concrete at 290 psi. Plan on 75 to 125 sq ft per 3-gallon kit.
Built for decorative systems
Works as a build coat, base coat, or clear coat over metallic base coats, flake systems, and prepared concrete.
Topcoat for full UV protection
As a clear epoxy it can amber under prolonged UV, so finish with a UV-stable polyaspartic for lasting clarity outdoors or in bright light.
Planning the job
Coverage and cure.
Per 3-gallon kit. Real coverage depends on concrete porosity and the profile of the slab.
Clear coat
75–125
sq ft per kit
Cure
Pot life 20 min at 75°FWithin 4 daysRecoat window
7 daysFull cure
Warmer temperatures speed this up; cooler temperatures slow it down.
PHYSICAL AND CHEMISTRY
| Solids content | 100% by volume |
| Chemistry | Modified epoxy and modified amine, 2-component, clear |
| Appearance / gloss | Clear and colorless, high gloss |
| Specific gravity | Approx. 1.09 |
| VOC (mixed) | Under 30 g/L |
MECHANICAL
| Adhesion to concrete | 290 psi (ISO 4624) |
| Compressive strength | 18,400 psi (ASTM D-695) |
| Flexural strength | 14,430 psi (ASTM D-790) |
| Hardness | 80 Shore D (ASTM D-2240) |
| Taber abrasion | 28 mg loss (ASTM D-4060) |
| Tensile strength | 8,400 psi (ASTM D-638) |
| Tensile elongation | 2.4% (ASTM D-638) |
APPLICATION AND CURE
| Mix ratio | 2 parts A to 1 part B by volume |
| Coverage | 75 to 125 sq ft per 3-gallon kit |
| Pot life | 20 min at 75°F, 50% RH |
| Dry to touch | 5 to 6 hours |
| Light foot traffic | 16 hours |
| Heavy traffic | 3 days |
| Maximum recoat | 4 days |
| Full cure | 7 days |
SUBSTRATE AND SYSTEM
| Surface preparation | CSP 2 to 3 by diamond grinding or shot blasting, concrete moisture below 6%, cured at least 28 days |
| Compatible over | Prepared concrete (CSP 2 to 3), metallic base coats, decorative flake |
| Topcoat | UV-stable polyaspartic for full UV protection (interior use unless topcoated) |
Kit to floor
Build the complete system.
What comes in the box, and what goes under and over it. Add any step to your cart from here.
In the kit
- 3-gallon kit: 2 gallons clear resin (Part A) plus 1 gallon hardener (Part B)
- Pre-measured 2 to 1 mix ratio by volume
- Clear base, tintable with pigment for tinted build coats
Pairs with
Pour MONEY COAT CLEAR over a metallic base coat, a decorative flake system, or a prepared concrete slab to add depth and a glass-hard clear layer. For full UV protection and lasting clarity outdoors or in bright light, finish with a UV-stable polyaspartic topcoat.
1Prep the slab
Everflow EF-160
$192.00Sold out
2Base coat
You are here
MONEY COAT™ CLEAR
$205.00This item
3Add a lookoptional
4Topcoatfor UV or extra gloss
Everflow EF-275
$199.00
5Tools
Latux Flat Squeegee
$35.00
What can I use MONEY COAT CLEAR over?
Prepared concrete profiled to CSP 2 to 3, metallic base coats, and decorative flake systems. It works as a build coat, base coat, or clear coat.
How much does a kit cover?
A 3-gallon kit covers about 75 to 125 sq ft, depending on how heavy you build the film. The kit mixes 2 to 1, 2 gallons of resin to 1 gallon of hardener.
How strong is it?
18,400 psi compressive, 8,400 psi tensile, 80 Shore D hardness, and 290 psi adhesion to concrete.
How long until I can use the floor?
At 75°F you get about 20 minutes of working time, light foot traffic in 16 hours, heavy traffic in 3 days, and full cure in 7 days.
Will it yellow over time?
As a clear epoxy it can amber under prolonged UV. For sunlit or outdoor areas, finish with a UV-stable polyaspartic topcoat.
What surface prep does it need?
Clean, dry concrete profiled to CSP 2 to 3, with moisture below 6% and a minimum 28-day cure.
Recently viewed
