DESCRIPTION
EF-Masterflow is Everflow's premium metallic epoxy floor coating, a professional 2-component, 100% solids system engineered so metallic and pearlescent pigments move and layer into the deep, directional, light-catching patterns that define high-end decorative concrete floors. It self-levels to a flawless, high-gloss finish, pours high-build for real depth, and stands up to residential and commercial traffic.
Built for the deepest metallic floors
Technical specifications
| PHYSICAL AND CHEMISTRY | |
| Solids content | 100% |
| Chemistry | UV-stable cycloaliphatic epoxy, 2-component |
| Finish / gloss | 94.7 GU at 60 degrees |
| Color | Clear, tintable with pigment or pearlescent packs |
| Viscosity | Part A 5,500 to 7,500 cps, Part B 300 to 500 cps |
| MECHANICAL | |
| Compressive strength | 7,200 psi (ASTM D695) |
| Tensile strength | 5,500 psi (ASTM D638) |
| Elongation at break | 7% (ASTM D638) |
| Hardness | 80 to 85 Shore D (ASTM D2240) |
| Taber abrasion | 0.1 g loss (CS-17, ASTM D4060) |
| Pull-off adhesion | Over 363 psi, substrate failure (ASTM D7234) |
| Slip resistance (DCOF) | About 0.42 wet, 0.92 dry |
| APPLICATION AND CURE | |
| Coverage | 160 sq ft per 4-gallon kit at 40 mils |
| Working time | 30 to 40 min at 70 degrees F, 50% RH |
| Cure at 68 degrees F | Recoat 18 to 24 hr, foot about 1 day, vehicle about 2 days, full about 7 days |
| Surface prep | Diamond grind concrete to ICRI CSP-2 |
| Apply temperature | 50 to 86 degrees F |
| Topcoat | UV-stable polyaspartic for full system protection |
| COMPLIANCE | |
| VOC | Under 50 g/L (LEED v4, SCAQMD 304-91) |
| Food contact | Meets requirements for indirect food contact |
| Shelf life | 1 year unopened, store 59 to 86 degrees F |
In the kit
- 4-gallon kit: 7.56 L clear resin (Part A) plus 7.56 L hardener (Part B)
- Pre-measured 1 to 1 mix ratio by volume
- Clear base, accepts color pigment packs (2 jars per kit) or pearlescent pigment (1 jar per kit), sold separately
Pairs with
Build the full metallic system with Latux metallic and pearlescent pigment pods, a primed and prepared base, and a UV-stable polyaspartic topcoat for gloss retention and full UV protection. Diamond grind the slab to ICRI CSP-2 before you pour.
Ordering
Ships free in the US. Add your kit to the cart, then add pigments and a topcoat in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.
Formulated for professional installers and supported by Latux.
