More in Epoxy Floor CoatingsView all
EF-100Epoxy Floor Coatings
EF-280Polyaspartic Top Coats
PPC Epoxy 100 Clear 100% Solids Epoxy Floor Coating (3-Gal Kit)Epoxy Floor Coatings
EF-MasterflowEpoxy Kits
EF-135Crack Filler
LTX-100Epoxy Floor Coatings
MONEY COAT™ CLEAREpoxy Kits
EF-150Epoxy Floor Coatings
EF-155Epoxy Floor Coatings
EF-191Countertop Epoxy
EF-195Deep Pour Epoxy
PPC · Kit)
At a glance
- SKU
- PPC-EPOXY100-CLEAR-3G
- Vendor
- PPC
- Solids
- 100% (0 VOC)
- Compressive strength
- 7,800 psi
- Coverage
- 150 to 200 sq ft base coat per 3-gallon kit
- Pot life
- 10 to 15 min, 30 to 40 min on the floor
- Weight
- 30.0 lb
Documents
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
PPC · Epoxy Floor Coatings
PPC Epoxy 100 Clear 100% Solids Epoxy Floor Coating (3-Gal Kit)
PPC Epoxy 100 Clear is a zero-VOC, 100% solids clear epoxy floor coating that lays down glass-clear and builds real thickness in one coat as a finish coat, base coat, or primer. A 3-gallon kit covers 150 to 200 sq ft as a base coat and cures hard at 85 Shore D and 7,800 psi compressive, making it the workhorse clear base for garage, warehouse, and metallic floors.
$169.00
Size 3 Gallon Kit
Big job or contractor pricing? Request a quote
- Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
- Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy
New customer? Get 10% off your first order
- USDA / CFIA Food & Beverage Meets USDA Food & Beverage and CFIA requirements
- 100% Solids 100% Solids
- Zero VOC Zero VOC
- Virtually Odorless Virtually Odorless
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
At a glance
PPC Epoxy 100 Clear 100% Solids Epoxy Floor Coating (3-Gal Kit)
PPC Epoxy 100 Clear is a zero-VOC, 100% solids clear epoxy floor coating, the workhorse clear that lays down glass-clear and builds real thickness in one coat. It is the clear base under metallic and flake systems and a straight clear build for garages, warehouses, shops, and showrooms.
100%
SOLIDS
Solvent-free build
85
SHORE D
Surface hardness
7,800
PSI
Compressive strength
0
VOC
Solvent-free, odorless
What makes it work
The workhorse clear for garage and metallic floors
Glass-clear, high build in one coat
Lays down glass-clear and self-levels to a high-gloss finish, building real thickness as a finish coat, base coat, or primer.
The clear base for metallic and flake
A 100% solids clear base under metallic and flake systems, and a straight clear build for shops and showrooms.
Zero VOC, virtually odorless
Solvent-free with no VOC, so it runs indoors without clearing the building, and it is LEED eligible.
One of the lowest yellowing rates
Cycloaliphatic polyamine technology carries one of the industry's lowest yellowing rates for a clear that stays clear.
Self-priming
Lay it directly as its own base coat at 150 to 200 sq ft per 3-gallon kit, or thin it out as a primer at 480 to 600 sq ft. Premera FP1 Fusion Primer cuts prep on tight surfaces.
Hard and durable
85 Shore D, 7,800 psi compressive, 6,500 psi tensile, and bond over 350 psi for garage, warehouse, and commercial floors.
Planning the job
Coverage and cure.
Per 3-gallon kit. Real coverage depends on concrete porosity and the profile of the slab.
Primer8 to 10 mils
480–600
sq ft per kit
Base coat
150–200
sq ft per kit
Cure
Pot life 10 to 15 min, 30 to 40 min on the floor8 to 24 hrRecoat window
24 hrFoot traffic
48 hrHeavy traffic
Warmer temperatures speed this up; cooler temperatures slow it down.
PHYSICAL AND CHEMISTRY
| Chemistry | 2-component cycloaliphatic polyamine epoxy, clear |
| Solids content | 100% by volume and weight |
| Finish / gloss | High gloss, Part A clear |
MECHANICAL
| Hardness | 85 Shore D |
| Compressive strength | 7,800 psi |
| Tensile strength | 6,500 psi |
| Bond / pull-off | Over 350 psi |
APPLICATION AND CURE
| Mix ratio | 2A to 1B by volume |
| Pot life | 10 to 15 min |
| Working time | 30 to 40 min on the floor |
| Recoat window | 8 to 24 hours |
| Cure | Foot traffic 24 hr, heavy traffic 48 hr |
| Coverage | Base coat 150 to 200 sq ft per 3-gallon kit; primer 8 to 10 mils, 480 to 600 sq ft |
| Minimum film | 8 mils for moderate traffic |
| Application temp | 65 to 82 degrees F |
| Substrate | Concrete 21 to 28 days, dry (under 4% moisture, calcium chloride at or under 3 lb per 1,000 sq ft, RH under 85%), profile CSP-2 to CSP-4 by grinding or shot blast, prime with Premera FP1 Fusion Primer to cut prep |
| Cleanup | MEK |
COMPLIANCE
| VOC | Zero, solvent-free |
| Food contact | Meets requirements for indirect food contact |
Kit to floor
Build the complete system.
What comes in the box, and what goes under and over it. Add any step to your cart from here.
In the kit
- 3-gallon kit, also available as a 15-gallon kit
- Two parts resin (A) to one part hardener (B) by volume
- Part A clear, self-levels to a high-gloss finish
Pairs with
Prime with Premera FP1 Fusion Primer, block moisture with Easy MVB, add color or metallic pigments, speed the cure with PPC Epoxy Accelerator, and topcoat sun-exposed floors with Premera T2. Apply with a 3/8 inch woven roller, a notched squeegee, and spike shoes.
1Prep the slab
Everflow EF-160
$192.00Sold out
2Base coat
You are here
PPC Epoxy 100 Clear 100% Solids Epoxy Floor Coating (3-Gal Kit)
$169.00This item
3Add a lookoptional
4Topcoatfor UV or extra gloss
Everflow EF-275
$199.00Sold out
5Tools
Latux Flat Squeegee
$35.00
What surfaces is PPC Epoxy 100 Clear for?
Garages, warehouses, shops, and showrooms, and as the clear base under metallic and flake systems.
How much does a 3-gallon kit cover?
A 3-gallon kit covers 150 to 200 sq ft as a base coat, and stretches to 480 to 600 sq ft as a primer at 8 to 10 mils, depending on concrete porosity and the profile of the slab.
What is the mix ratio?
Two parts resin (A) to one part hardener (B) by volume. Pot life is 10 to 15 minutes and working time is 30 to 40 minutes.
When can I recoat and walk on it?
Recoat within 8 to 24 hours. Foot traffic at 24 hours and heavy traffic at 48 hours.
Do I need a primer?
It is self-priming, so you can lay it as its own base coat, or prime with the Premera FP1 Fusion Primer to cut prep on tight surfaces.
Is it low odor for indoor work?
Yes. It is solvent-free with zero VOC and virtually odorless, so it runs indoors.
Recently viewed