DESCRIPTION
PPC Epoxy 100 is a metallic-floor epoxy engineered to stay clear, a solvent-free, zero-VOC, two-component cycloaliphatic epoxy floor coating with one of the industry's slowest tendencies to yellow. Built for warehouses, showrooms, healthcare, retail, garages, and kitchens, it preserves the depth and shimmer of metallic pigment and doubles as a solid-color finish or self-priming undercoat.
Built to keep metallic floors clear
Technical specifications
| PHYSICAL AND CHEMISTRY | |
| Type | Solvent-free 2-component cycloaliphatic epoxy |
| Solids content | 100% by volume and weight |
| UV resistance | Industry-leading color stability, may slowly shift under prolonged UV |
| Finish / gloss | High-gloss, clear or pigmented |
| Viscosity | 650 cps (medium) |
| Colors | Clear plus 5 standard colors |
| MECHANICAL | |
| Hardness | 85 Shore D (ASTM D2240) |
| Compressive strength | 7,800 psi (ASTM C579) |
| Tensile / traction | 3,900 psi (ASTM D638) |
| Taber abrasion | 75 to 80 mg loss (CS-17, ASTM D4060) |
| Bond / pull-off | Over 350 psi, substrate fails (ASTM D4541) |
| Permeability | 0.1% (ASTM D570) |
| APPLICATION AND CURE | |
| Mix ratio | 2A to 1B by volume |
| Pot life | 10 to 15 min |
| Working time | 30 to 40 min on the substrate |
| Recoat window | 8 to 24 hours |
| Cure at 70 degrees F | Foot traffic 24 hr, heavy traffic 48 hr |
| Coverage | 133 to 200 sq ft per gallon at 8 to 12 mils wet film |
| Kit sizes | 3 US gal (25 lb) and 15 US gal (125 lb) |
| Substrate | Concrete min 21 to 28 days, profile CSP-2 to CSP-4 or minimal prep with FP1 primer, moisture under 3 lb per 1,000 sq ft per 24 hr, RH under 85% (use PPC Moisture Vapor Barrier if exceeded) |
| COMPLIANCE AND SAFETY | |
| VOC | None (zero-VOC, virtually odorless) |
| Flammability | Class I, not considered flammable, flash point above 200 degrees F |
| Shelf life | 12 months unopened |
In the kit
- 3 US gallon kit (25 lb), also available as a 15 US gallon kit (125 lb)
- Two parts resin (A) to one part hardener (B) by volume
- Clear base or factory-pigmented in 5 standard colors
Pairs with
Prime sound, stable surfaces with Premera FP1 Fusion Primer to cut prep, add metallic or color pigments for the finished look, control high slab moisture with PPC Moisture Vapor Barrier, and topcoat sun-exposed floors with a UV-stable clear such as Premera T2 MCM.
Ordering
Ships free in the US. Add your kit to the cart, then add primer, pigments, or a topcoat in a click. Running a large job or need contractor pricing? Message your Latux rep and we will set you up.
Formulated for professional installers and supported by Latux.
