More in PremeraView all
Premera · Sealer
At a glance
- SKU
- PREMERA-QUICKSEAL-1G
- Vendor
- Premera
- Dry time
- about 2 minutes
- Coverage
- 150 to 300 sq ft per gallon
- Coats
- 1 on tight concrete, up to 3 on absorbent slabs
- Weight
- 10.0 lb
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
Premera · Sealer
Premera QuickSeal Fast-Cure Acrylic Concrete Sealer
Premera QuickSeal is a single-component acrylic sol-gel concrete sealer that sprays on and dries in about two minutes. It pre-seals porous or non-densified concrete so Premera T2 lays down right, which doubles or triples T2 coverage, and converts to a stain-and-seal with acetone-based dye.
$75.00
Size 1 Gallon
Big job or contractor pricing? Request a quote
- Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
- Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy
New customer? Get 10% off your first order
- Low VOC (<20 g/L) Low VOC (<20 g/L)
- Family-Run Since 2004 20+ years in the trade
At a glance
Premera QuickSeal Fast-Cure Acrylic Concrete Sealer
Premera QuickSeal is a single-component acrylic sol-gel concrete sealer, a spray-down coat that dries in about two minutes and pre-seals porous concrete before a topcoat goes down. It is built for installers who want to seal and topcoat in one visit, and it doubles as a fast stain-and-seal when you add acetone-based dye.
2 MIN
DRY TIME
Seal and top same visit
150-300
SQ FT/GAL
Per gallon
2-3x
T2 COVERAGE
Stretches the topcoat
1-3
COATS
By concrete porosity
What makes it work
A fast pre-seal for porous concrete
Dries in about two minutes
Spray it on and walk away. The fast set lets crews seal and topcoat the same floor in one visit.
Stretches your topcoat
Pre-sealing non-densified or porous concrete lets Premera T2 lay down right and doubles or triples T2 coverage.
Doubles as stain-and-seal
Add 1 to 2 oz of acetone-based dye per gallon, seal, then top with T2 for color on porous concrete.
Coats to porosity
One coat on tight concrete, up to three coats on highly absorbent slabs.
COVERAGE AND APPLICATION
| Coverage | 150 to 300 sq ft per gallon |
| Application | 2 to 3 mils wet per coat, 50% overlap, 2 minutes apart |
| Coats | One on tight concrete, up to three on absorbent slabs |
| Application temperature | 45 to 105F |
CURE
| Dry time | About 2 minutes |
COMPOSITION AND OPTIONS
| Chemistry | Single-component acrylic sol-gel, acetone-based |
| Stain-and-seal | 1 to 2 oz acetone dye per gallon, then T2 |
| New concrete under 28 days | Use Easy MVB first |
| Cleanup | Acetone |
Kit to floor
Build the complete system.
What comes in the box, and what goes under and over it. Add any step to your cart from here.
Pairs with
Pre-seal porous or non-densified concrete, then topcoat with Premera T2. On slabs under 28 days old, prime with Premera Easy MVB first.
What is QuickSeal for?
It pre-seals porous or non-densified concrete before a topcoat, so crews can seal and topcoat the same floor in one visit.
How fast does it dry?
In about two minutes, which lets you seal and topcoat in one visit.
Does it stretch my topcoat?
Yes. Pre-sealing porous concrete lets Premera T2 lay down right and doubles or triples T2 coverage.
Can I use it to add color?
Yes. Add 1 to 2 oz of acetone-based dye per gallon, seal, then top with T2 for color on porous concrete.
How many coats do I need?
One coat on tight concrete, up to three coats on highly absorbent slabs.
What about new concrete?
On slabs under 28 days old, prime with Premera Easy MVB first.
Recently viewed
