More in AccessoriesView all
Wooster Big Ben 18 in. Roller FrameAccessories
Flat SqueegeeAccessories
Pro Roller 18 in. Pro Performance Woven Roller Cover, 3/8 in. Nap (With End Caps)Accessories
Metabo HPT G18STAngle grinder
Metabo WEV 15-125 HTAngle grinder
Nitrile 5 Mil Black Industrial GlovesAccessories
Spike Shoes (Epoxy Installer Cleats)Accessories
Latux · Squeegee
At a glance
- SKU
- SQUEEGEE-12
- Vendor
- Latux
- Sizes
- 12, 18, 24 in
- Blade
- Red Rubber on Steel
- Compatible
- All Pourable Everflow Systems
- Weight
- 1.15 lb
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
Latux · Accessories
Latux Flat Squeegee
The Latux Flat Squeegee spreads 100% solids epoxy, polyaspartic, and self-leveling floor coatings evenly across concrete. A red rubber blade on a riveted steel backing holds a straight edge through a full pour, and the socket handle threads onto an extension pole. Choose 12, 18, or 24 in.
$35.00
Size 12 in
Big job or contractor pricing? Request a quote
- Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
- Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy
At a glance
Latux Flat Squeegee
The Latux Flat Squeegee is a pro-grade epoxy squeegee, built to spread 100% solids epoxy, polyaspartic, and self-leveling floor coatings evenly across concrete. A red rubber blade rides on a riveted steel backing plate, so it holds a straight edge through a full pour instead of flexing out like the light blades sold at Home Depot or Lowe's. The socket handle is threaded for a standard extension pole, and it comes in three widths so you can match the tool to the slab.
3
WIDTHS
12, 18 and 24 in
RUBBER
RED BLADE
Non-marking
STEEL
BACKING PLATE
Riveted, holds a line
POLE
READY SOCKET
Work standing up
What makes it work
Which width do you need?
Wider spreads faster but demands a steadier pull and enough material on the floor to stay ahead of the edge. Most crews carry a wide blade for the open floor and a 12 in for detail work.
12 in · 1.15 lb
TIGHT SPACES AND DETAIL
Closets, bathrooms, laundry rooms, stair landings, and cutting in along walls and around obstacles. Also the one to grab for small patch and repair pours.
18 in · 1.4 lb
THE ALL-ROUNDER
The default for a single-car garage or one room. Best balance of coverage and control, and the easiest width to keep a consistent pull on a slab that is not perfectly flat.
24 in · 1.5 lb
OPEN FLOOR, FEWEST PASSES
Two and three-car garages, warehouse bays, and showrooms. Covers twice the ground per pull of the 12 in, so you spend less of the pot life spreading.
Built for professional floor installs
Built for pro coatings
Handles 100% solids epoxy and polyaspartic without dragging or flexing out like a hardware-store blade.
Red rubber on a steel backing
The rubber blade is riveted to a steel plate that keeps the edge straight under load, so the film stays even instead of scalloping where the blade bows.
Threaded pole socket
The socket grip is threaded for a standard extension pole, so you can spread a whole slab standing up instead of on your knees.
Even, controlled spread
The rigid flat blade moves high-viscosity material smoothly so you control film build and cut waste before back-rolling.
Non-marking blade
Rubber will not scuff or streak the substrate, which matters on light-colored and clear-coated floors.
Pairs with a back-roller
Spread with the squeegee, then back-roll with an 18 in epoxy roller cover for a uniform finish across the floor.
SIZES AND WEIGHT
| 12 in | 1.15 lb shipped |
| 18 in | 1.4 lb shipped |
| 24 in | 1.5 lb shipped |
CONSTRUCTION
| Blade | Red rubber, flat, non-marking |
| Backing | Riveted steel plate |
| Handle | Plated socket with ribbed grip, threaded for an extension pole |
| Pole | Not included |
USE
| Materials | 100% solids epoxy, polyaspartic, urethane, self-leveling coatings |
| Compatible with | All pourable Everflow systems |
| Role | Spread and set film thickness before back-rolling |
Kit to floor
Build the complete system.
What comes in the box, and what goes under and over it. Add any step to your cart from here.
How to use it
Pour a ribbon of mixed material onto the prepared slab and pull it out with the squeegee held at a low angle, working in sections and keeping a wet edge. Then back-roll the same section in one direction to even the film and release trapped air. Scrape and wipe the blade down before the material sets; once epoxy cures on the rubber it will not pull a clean line again.
Complete the system
Do you ship nationwide?
Yes. We ship to all 50 states via standard ground and expedited freight. Contact us for international shipping inquiries.
What is your return policy?
We do not accept returns. If your order arrives damaged or we shipped the wrong item, we replace it free of charge. Report it within 48 hours of delivery with clear photos or video, and approved replacements are issued within 7 to 10 days. Manufacturing defects are covered separately under our Limited Warranty. Full terms are in our Replacement Policy.
Do you offer contractor or bulk pricing?
Yes. We offer tiered contractor pricing and distributor accounts. Contact our sales team with your company information and typical order volume to get set up.
Is technical support available?
Our technical team is available Monday to Friday 8am to 5pm EST by phone and email for installation guidance, system specs, and job-site support.
Recently viewed
