-
Vendor:PPC Epoxy 100 Clear is a zero-VOC, 100% solids clear epoxy floor coating, the workhorse clear that lays down glass-clear and builds real thickness in one coat. It is the clear base under metallic and flake systems and a straight clear build for garages,...Regular price $169.00 USDRegular priceUnit price per
-
Vendor:PPC Krete Topcoat is the seal-and-finish coat for the Krete urethane cement floor, a four-component polyurethane coating and grout that locks in a Krete Slurry SL floor. It finishes smooth matte or, with a silica broadcast, builds the slip resistance a wet kitchen or...Regular price $72.00 USDRegular priceUnit price per
- Gray
- Light Gray
- Red
- Yellow
-
Vendor:PPC Krete Slurry SL is a self-leveling urethane cement floor, a four-component polyurethane mortar built to survive wash-down kitchens, freezers, and constant cleaning. It is made for food prep, beverage plants, breweries, pharma, and cold storage that need a smooth, easy-clean urethane cement floor...Regular price $112.00 USDRegular priceUnit price per
- Gray
- Light Gray
- Red
- Yellow
-
Vendor:Premera Easy MVB is a single-component moisture vapor barrier primer, a water-based treatment that penetrates bare concrete and reacts with the free calcium hydrates to seal the pores and capillaries from the inside. It is built for installers who need to slow rising slab...Regular price $130.00 USDRegular priceUnit price per
-
Vendor:Premera FP1 Fusion Primer is a single-component sol-gel primer, a coat that chemically fuses to clean, sound concrete and to existing coatings so you can prime without grinding the whole slab. It is built for installers running epoxy, metallic epoxy, and polyaspartic systems who...Regular price $175.00 USDRegular priceUnit price per
-
Vendor:Premera QuickSeal is a single-component acrylic sol-gel concrete sealer, a spray-down coat that dries in about two minutes and pre-seals porous concrete before a topcoat goes down. It is built for installers who want to seal and topcoat in one visit, and it doubles...Regular price $75.00 USDRegular priceUnit price per
-
Vendor:The Pro Performance woven roller cover is built for floor coatings, not wall paint. Shed-resistant woven Dralon fiber sits on a solvent-resistant phenolic core, so it holds together through a pour of 100% solids epoxy or solvent-based polyaspartic, where a hardware-store cover swells, goes...Regular price $12.99 USDRegular priceUnit price per
-
Vendor:Solid Tone Liquid Pigment Pods are pre-measured 1 liter liquid colorants that tint 100% solids epoxy base coats to a uniform, repeatable solid color, so the floor reads the same from the first section to the last. This liquid epoxy pigment blends smoothly into...Regular price From $45.00 USDRegular priceUnit price per
- Almond
- Black
- Charcoal Metallic
- Dark Beige
-
Vendor:Spike shoes let you walk across a fresh epoxy pour to check, back-roll, or broadcast flake without leaving flat-soled footprints in the wet film. They strap over your existing footwear, and the spiked sole spreads your weight across dozens of fine points so contact...Regular price $24.99 USDRegular priceUnit price per
-
Vendor:The Turbo Supreme diamond cup wheel opens concrete to the ICRI CSP 2 to 3 profile that Everflow epoxy and polyaspartic coatings need for a proper bond. It runs on a standard angle grinder with a 5/8-11 UNC spindle, in a 5 inch size...Regular price From $89.99 USDRegular priceUnit price per
-
Vendor:The Wooster Big Ben 18 inch roller frame is a heavy-duty handle for running 18 inch covers on 100% solids epoxy and polyaspartic floor coatings. It carries the weight of full-build material without flexing and holds even pressure across the full width, so back-roll...Regular price $19.99 USDRegular priceUnit price per
Browse by category
Epoxy Systems
Polyaspartic & Urethane
Metallic Pigments
Floor Grinders
Moisture Barriers
Epoxy Flakes
Accessories
Diamond Tooling
Popular products
Searching...
No results found.
