-
Vendor:Clean, graded 16-30 mesh silica sand, broadcast into a wet base coat to build the non-slip texture and wear resistance a deck waterproofing system needs. This is a loose aggregate and nothing more. Washed, dried and screened to a 16-30 mesh gradation, it carries...
-
Vendor:An economical single-component, moisture-cured urethane basecoat that builds a seamless waterproofing membrane on concrete, plywood, and metal. B-Tuff 302 NG is a liquid-applied, moisture-cured, flexible aromatic-urethane basecoat carried by Latux from the PSI/Poly-Tuff waterproofing line. It is the value-focused base membrane in the range:...Regular price From $46.01 USDRegular priceUnit price per
-
Vendor:A two-component, fast-setting polyurea-urethane basecoat that reinforces while wet and cures rapidly, even in cold weather. B-Tuff 308 is a solvent-free, high-solids hybrid polyurea urethane waterproofing membrane carried by Latux from the PSI/Poly-Tuff line. Side A (dark grey) and Side B (black) are premeasured...Regular price From $63.69 USDRegular priceUnit price per
-
Vendor:A biodegradable, non-acid etch that profiles and cleans concrete so your primer and membrane actually bond. B-Tuff Etch is a concentrated, VOC-free concrete profiling and cleaning solution that opens up the surface without the hazards of muriatic or phosphoric acid. It will not burn...Regular price From $42.24 USDRegular priceUnit price per
-
Vendor:A concentrated pigment paste that tints PSI topcoats and membranes to a standard or custom color without weakening the coating. Color Pack Paste is a ready-to-disperse pigment concentrate that colors your PSI urethane topcoats and membranes to a consistent standard shade or a custom...Regular price $25.53 USDRegular priceUnit price per
-
Vendor:EF-155 is Everflow's super-fast-cure 100% solids epoxy floor coating, a 2-component, self-leveling base that recoats in as little as 2 to 4 hours so a crew can build a complete epoxy floor in a single day. Its clear, fast-setting base makes it a strong...Regular price $210.00 USDRegular priceUnit price per
-
Vendor:EF-Masterflow is Everflow's premium metallic epoxy floor coating, a professional 2-component, 100% solids system engineered so metallic and pearlescent pigments move and layer into the deep, directional, light-catching patterns that define high-end decorative concrete floors. It self-levels to a flawless, high-gloss finish, pours high-build...Regular price $225.00 USDRegular priceUnit price per
-
Vendor:A 100%-solids, zero-VOC epoxy moisture barrier that holds back concrete vapor before flooring goes down. Enviro-Grip 404FC is a 100%-solids, zero-VOC epoxy primer that works as a moisture vapor barrier over concrete slabs. Mixed 2 parts A to 1 part B, it forms a...Regular price $400.27 USDRegular priceUnit price per
-
Vendor:A two-component epoxy primer that bites into metal flashings and stands up to medium-to-heavy traffic. Enviro-Grip ep#2sc is a two-component solvenated epoxy-polyamine penetrating primer. Side A (black) and Side B (white) mix 1 to 1 by volume and cure into a tough, chemically bonded...Regular price From $146.03 USDRegular priceUnit price per
-
Vendor:A fast-turnaround urethane-polyurea primer that grips exterior decks and pedestrian surfaces before your waterproofing goes down. Enviro-Grip PUR#5 is a single-component aromatic urethane-polyurea primer built for outdoor, light-duty, and pedestrian deck areas. It soaks into the substrate, locks down surface dust, and gives your...Regular price $253.18 USDRegular priceUnit price per
-
Vendor:A water-based moisture primer built to bond over asphalt. Enviro-Grip WBM is a water-based moisture and membrane primer used over asphalt surfaces. It is a two-component product, Side A (yellow) and Side B (off-white), formulated to prepare asphalt substrates for the PSI waterproofing buildout....Regular price $441.19 USDRegular priceUnit price per
-
Vendor:A low-odor waterborne epoxy primer that grips concrete, wood, modified bitumen, and asphalt. Enviro-Grip WBs is a waterborne, low-VOC, low-odor epoxy primer for interior and enclosed work where solvent smell is a problem. It ties into a wide range of substrates including concrete, wood,...
-
Vendor:EF-100 is a 3-gallon, 100% solids epoxy floor kit and Everflow's flagship base coat. Garage floors, shops, warehouses and food plants. It self-levels to a high-gloss finish and bonds to diamond-ground concrete or existing epoxy. Pros also use it as a high-build primer and...Regular price $179.99 USDRegular priceUnit price per
- Clear (Transparent)
- White
- Beige
- Light Grey
-
Vendor:EF-135 is Everflow's super fast cure epoxy crack filler, a 2-component paste that fills horizontal and vertical cracks in concrete and takes foot traffic the same day. It bonds to concrete, masonry, wood, metal, and plastics, so one pail handles slab cracks, control joints,...Regular price $125.00 USDRegular priceUnit price per
-
Vendor:EF-150 is Everflow's fast-cure 100% solids epoxy floor coating, a 2-component, self-leveling floor built for jobs where time and temperature work against you. It recoats in as little as 6 to 8 hours and cures on a cold substrate, so winter work and tight...Regular price $198.00 USDRegular priceUnit price per
-
Vendor:EF-160 is Everflow's 100% solids epoxy moisture vapor barrier, a two-component primer that seals damp, vapor-emitting concrete so an epoxy or polyaspartic floor bonds and stays bonded. Built for cold, humid conditions and green or poorly prepared slabs, it stops the rising slab moisture...Regular price $192.00 USDRegular priceUnit price per
-
Vendor:EF-191 is Everflow's 100% solids countertop epoxy, a two-component, crystal-clear coating that self-levels to a glass-smooth, high-gloss finish on kitchen counters, bar tops, and live-edge slabs. Built for fabricators and hands-on pros, it pours up to 1/4 inch thick in a single application and,...Regular price $175.00 USDRegular priceUnit price per
-
Vendor:EF-195 is Everflow's 100% solids deep-pour casting epoxy, a two-component, crystal-clear resin that casts up to 3 inches in a single lift for river tables, encapsulations, and molds. Built for woodworkers and resin artists, its long 60-minute working time and low mixed viscosity flow...Regular price $219.00 USDRegular priceUnit price per
-
Vendor:EF-275 is a solvent-based polyaspartic clear coat in a 2-gallon kit, made to seal epoxy, solid-color and vinyl flake floors. Garages, shops and commercial spaces that need to reopen the same day. It won't yellow or chalk, and one kit covers about 400 sq...Regular price $199.00 USDRegular priceUnit price per
-
Vendor:EF-280 is a 3-gallon polyaspartic floor coating kit, the clear topcoat that seals epoxy, solid-color and flake floors. Garages, shops, showrooms and commercial floors. It's aliphatic, so it won't yellow or chalk in sunlight, and one kit covers about 600 sq ft over an...Regular price $299.00 USDRegular priceUnit price per
-
Vendor:EF-285 is Everflow's solvent-based aliphatic polyurea coating, a UV-stable primer and base coat in one that bonds directly to diamond-ground concrete and resists yellowing and chalking. Latux stocks it in clear, and it primes and protects in a single fast-curing coat for professional installers...Regular price $173.00 USDRegular priceUnit price per
-
Vendor:EF-290 is Everflow's fast-curing, high-build polyaspartic topcoat, the highest-solids clear coat in the line at 90 percent, so it lays down a thicker, more protective film over solid-color coatings and vinyl flake floors in fewer coats. Built for professional installers on limited-downtime jobs, it...Regular price $235.00 USDRegular priceUnit price per
-
Vendor:EF-301 is Everflow's aliphatic polyurethane finish coat, a 3-component, UV-stable urethane topcoat that cures to a low-sheen satin finish and hides the scuffs and foot-traffic marks that high gloss shows. Formulated with aluminum oxide for slip resistance and low VOC, it is the finishing...Regular price $189.00 USDRegular priceUnit price per
-
Vendor:The HTG IVC-45P is a propane dust collector, a 16 hp Vanguard powered vacuum that pulls 350 CFM through a cyclone and a Longopac continuous bag to keep silica out of the air. It runs on vapor or liquid propane with no power cord,...Regular price $10,950.00 USDRegular priceUnit price per
Browse by category
Epoxy Systems
Polyaspartic & Urethane
Metallic Pigments
Floor Grinders
Moisture Barriers
Epoxy Flakes
Accessories
Diamond Tooling
Popular products
Searching...
No results found.
