-
Vendor:A one-part, water-cured joint sealant that guns fast, cures without mixing, and stays flexible from vertical walls to overhead details. PTS E-101 is a single-component, 100% solids, water-curable elastomeric joint sealant for moving and non-moving joints, inside or out. It bonds to a wide...Regular price $120.84 USDRegular priceUnit price per
-
Vendor:A low-modulus, water-curable elastomeric membrane that seals interior and exterior surfaces with one product and no mixing. PTS-R12 is a single-component, 100%-solids waterproofing membrane, adhesive, and coating from the PSI Poly-Tuff line. It cures by reaction with atmospheric moisture, so there is no two-part...Regular price From $113.63 USDRegular priceUnit price per
- White
- Grey
-
Vendor:Solid Tone Liquid Pigment Pods are pre-measured 1 liter liquid colorants that tint 100% solids epoxy base coats to a uniform, repeatable solid color, so the floor reads the same from the first section to the last. This liquid epoxy pigment blends smoothly into...Regular price From $45.00 USDRegular priceUnit price per
- Almond
- Black
- Charcoal Metallic
- Dark Beige
-
Vendor:Spike shoes let you walk across a fresh epoxy pour to check, back-roll, or broadcast flake without leaving flat-soled footprints in the wet film. They strap over your existing footwear, and the spiked sole spreads your weight across dozens of fine points so contact...Regular price $24.99 USDRegular priceUnit price per
-
Vendor:A single-component, high-solids waterproofing membrane that installs at any thickness from 30 to 2,500 mils in one pass, on green concrete or cured. T-Shield WC-100 is a water-catalyzed, bitumen-modified, coal-tar-free urethane-polyurea membrane carried by Latux from the PSI/Poly-Tuff line. It builds a seamless, joint-free,...Regular price From $40.71 USDRegular priceUnit price per
-
Vendor:A non-woven polyester reinforcement fabric that bridges cracks and ties detail work together inside your fluid-applied waterproofing. Tie-Tex T-325 is a spun polyester reinforcing fabric that embeds directly into the wet membrane to add tensile strength, bridge shrinkage cracks, and hold detail areas together...Regular price $194.92 USDRegular priceUnit price per
-
Vendor:A two-component, low-odor, high-solids aliphatic topcoat that finishes your deck with a fast-curing, UV-stable wear layer rated for foot and vehicle traffic. Top-Shield 5600EF is a two-component, hybrid aliphatic-elastomeric topcoat that lays down the finished wear surface over a PSI waterproofing membrane. It sets...Regular price From $70.28 USDRegular priceUnit price per
-
Vendor:A single-component, economical aliphatic urethane topcoat that reseals and protects concrete and plywood decks with a UV-stable, weatherable finish. Top-Shield ALP-150 is a single-component, moisture-cured aliphatic urethane topcoat built for pedestrian decks and for resealing existing urethane surfaces. It rolls or sprays on straight...Regular price $346.75 USDRegular priceUnit price per
-
Vendor:A single-component, high-gloss aliphatic topcoat that puts a tough, UV-stable wear layer over your deck waterproofing system. Topshield M1 Gloss is the final protective finish for pedestrian and vehicular traffic-deck coatings. It goes down as a liquid-applied, moisture-cured film that seals and shields the...Regular price From $89.90 USDRegular priceUnit price per
-
Vendor:Torginol epoxy floor flakes are professional vinyl broadcast chips for full-broadcast epoxy floor flake systems, a durable decorative finish for garage, basement, shop, and light commercial floors. At a full broadcast to rejection this 25 pound box of 1/4 inch epoxy floor flakes covers...Regular price $99.00 USDRegular priceUnit price per
- Basalt
- Cabin Fever
- Carbon
- Domino
-
Vendor:Torginol epoxy floor flakes are professional vinyl broadcast chips for full-broadcast epoxy floor flake systems, sized here in a 40 pound bulk box for larger residential pours, multi-bay garages, and light commercial floors. At a full broadcast to rejection this bulk box of 1/4...Regular price $175.00 USDRegular priceUnit price per
- Basalt
- Cabin Fever
- Carbon
- Domino
-
Vendor:The Turbo Supreme diamond cup wheel opens concrete to the ICRI CSP 2 to 3 profile that Everflow epoxy and polyaspartic coatings need for a proper bond. It runs on a standard angle grinder with a 5/8-11 UNC spindle, in a 5 inch size...Regular price From $89.99 USDRegular priceUnit price per
-
Vendor:The Wooster Big Ben 18 inch roller frame is a heavy-duty handle for running 18 inch covers on 100% solids epoxy and polyaspartic floor coatings. It carries the weight of full-build material without flexing and holds even pressure across the full width, so back-roll...Regular price $19.99 USDRegular priceUnit price per
Browse by category
Epoxy Systems
Polyaspartic & Urethane
Metallic Pigments
Floor Grinders
Moisture Barriers
Epoxy Flakes
Accessories
Diamond Tooling
Popular products
Searching...
No results found.
