More in EverflowView all
EF-100Epoxy Floor Coatings
EF-280Polyaspartic Top Coats
EF-275Polyaspartic Top Coats
EF-MasterflowEpoxy Kits
EF-135Crack Filler
EF-290Polyaspartic Top Coats
EF-285Primer
EF-195Deep Pour Epoxy
EF-191Countertop Epoxy
EF-155Epoxy Floor Coatings
EF-160Moisture Vapor Barrier
EF-301Polyurethane Finish Coat
EF-150Epoxy Floor Coatings
Everflow · EF-195
At a glance
- SKU
- EF-195
- Vendor
- Everflow
- Pour Depth
- up to 3 in
- UV
- Superior Stability
- VOC
- 0 g/L
- Coverage
- 1.5 sq ft at 3 in deep
- Working time
- 60 min at 70°F
- Weight
- 30.3 lb
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
Everflow · Deep Pour Epoxy
Everflow EF-195
Low Exotherm Epoxy Casting System
EF-195 is a 100% solids, two-component deep-pour casting epoxy that pours up to 3 inches in a single lift with a long 60-minute work time and excellent bubble release. It offers superior UV stability and 11,900 psi compressive strength, and when properly mixed and cured it meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact.
$219.00
Big job or contractor pricing? Request a quote
- Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
- Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy
New customer? Get 10% off your first order
- CFIA Direct Food Contact Meets CFIA requirements for direct food contact when mixed and cured properly
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Zero VOC Zero VOC
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
At a glance
Everflow EF-195
EF-195 is Everflow's 100% solids deep-pour casting epoxy, a two-component, crystal-clear resin that casts up to 3 inches in a single lift for river tables, encapsulations, and molds. Built for woodworkers and resin artists, its long 60-minute working time and low mixed viscosity flow around complex shapes and release trapped air for a clean, void-free casting.
You may know this one as MPC-195. Same casting system, renamed to Everflow.
3"
POUR DEPTH
In a single lift
11,900
PSI
Compressive strength
60
MIN WORK TIME
Time to place and detail
0
G/L VOC
Zero-VOC formula
What makes it work
Built for deep, crystal-clear casting
Deep-pour casting up to 3 inches
Cast thick river-table pours, encapsulations, and molds in a single lift instead of building up thin layers.
Superior UV stability
Stays clearer and resists ambering better than ordinary casting epoxies, keeping art and tabletops looking new.
Long work time, crystal clear
A 60-minute working time and low mixed viscosity flow into tight crevices with excellent bubble release.
Zero VOC
A true 0 g/L VOC formula that is LEED v4 low-emitting and friendlier for indoor studios and workshops.
Hard and polish-ready
11,900 psi compressive strength and 80 to 85 Shore D give a hard, durable casting that sands and polishes clean.
Meets direct and indirect food-contact requirements
When properly mixed and cured, EF-195 meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact.
Planning the job
Coverage and cure.
Per 3-gallon kit.
Deep pour3 inch
~1.5
sq ft per kit
Cure at 68°F
Working time 60 min at 70°F72 to 96 hrDry to touch
About 7 daysFull cure
Warmer temperatures speed this up; cooler temperatures slow it down.
PHYSICAL AND CHEMISTRY
| Solids content | 100% by weight |
| Chemistry | 2-component epoxy casting resin, clear |
| UV stability | Superior versus typical casting epoxies |
| Finish / gloss | 92.8 GU at 60 degrees, high-gloss clear |
| Color | Clear, tintable with pigment or metallic packs |
| Viscosity | Part A 1,900 to 2,200 cps, Part B 150 to 250 cps |
MECHANICAL
| Compressive strength | 11,900 psi (ASTM D695) |
| Hardness | 80 to 85 Shore D (ASTM D2240) |
APPLICATION AND CURE
| Max pour depth | 3 inch (3000 mils) per lift |
| Working time | 60 min at 70 degrees F, 50% RH |
| Cure at 68 degrees F | Dry to touch 72 to 96 hr, full about 7 days |
| Coverage | About 1.5 sq ft at 3 inch per 3-gallon kit |
| Application | Pour into mold, wait 15 to 20 min, torch at 45 degrees to release bubbles, seal porous material first |
COMPLIANCE
| VOC | 0 g/L (zero-VOC, LEED v4 low-emitting) |
| Food contact | Meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact |
| Shelf life | 1 year unopened, store 59 to 86 degrees F |
Kit to floor
Build the complete system.
What comes in the box, and what goes under and over it. Add any step to your cart from here.
In the kit
- 3-gallon kit: 7.56 L clear resin (Part A) plus 3.78 L hardener (Part B)
- Clear base, tintable with pigment or metallic packs, sold separately
Pairs with
Color EF-195 with Latux pigment or metallic packs, seal porous wood, bark, or inclusions before you cast, and finish sun-exposed pieces with a UV-stable topcoat, since epoxy can amber under prolonged UV.
1Prep the slab
Everflow EF-160
$192.00Sold out
2Base coat
You are here
Everflow EF-195
$219.00This item
3Add a lookoptional
4Topcoatfor UV or extra gloss
Everflow EF-275
$199.00Sold out
5Tools
Latux Flat Squeegee
$35.00
How deep can I pour EF-195 in one lift?
Up to 3 inches (3000 mils) per pour. For thicker projects, pour in multiple lifts, allowing each to firm up first. A 3-gallon kit yields about 1.5 sq ft at the full 3 inch depth.
Will EF-195 turn yellow over time?
It's formulated for superior UV stability and resists ambering far better than ordinary casting epoxies, so castings stay clearer and look new longer. For pieces in constant intense sunlight, a UV-stable topcoat adds extra protection.
What is the working time and how long does it take to cure?
You get a long 60-minute working time at 70°F. At 68°F it's dry to the touch in 72 to 96 hours, with full chemical cure in about 7 days. Deep pours and cooler temps extend these times.
What can I make with EF-195?
It's built for river tables, embedding and encapsulation, jewelry, and fine arts and crafts, any project that needs a thick, clear, durable casting.
Is EF-195 food-safe?
When properly mixed and cured, EF-195 meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact and use in food plants. Because results depend on correct mixing and curing by the user, each finished piece should be assessed individually.
How do I get a bubble-free, clear casting?
Mix Part A and Part B for no more than 1 minute on a low-speed drill, pour into your mold, wait 15 to 20 minutes, then lightly pass a propane torch over the surface at a 45° angle. Seal porous wood with a thin coat first to prevent outgassing.
How is EF-195 different from EF-191?
EF-195 is a deep-pour casting resin (up to 3 inches) with superior UV stability for river tables and art. EF-191 is a countertop coating for thinner pours up to 1/4” on counters and bar tops.
Does EF-195 come in colors?
It's clear out of the kit and fully tintable. Add Latux pigment to create custom colors and effects.
Recently viewed
