More in EverflowView all
EF-100Epoxy Floor Coatings
EF-280Polyaspartic Top Coats
EF-275Polyaspartic Top Coats
EF-MasterflowEpoxy Kits
EF-135Crack Filler
EF-290Polyaspartic Top Coats
EF-285Primer
EF-195Deep Pour Epoxy
EF-191Countertop Epoxy
EF-155Epoxy Floor Coatings
EF-160Moisture Vapor Barrier
EF-301Polyurethane Finish Coat
EF-150Epoxy Floor Coatings
Everflow · EF-191
At a glance
- SKU
- EF-191
- Vendor
- Everflow
- Solids
- 100%
- Food Contact
- CFIA direct; CFIA and USDA indirect
- Pour Depth
- up to 1/4 in
- Coverage
- 12 to 50 sq ft by depth
- Working time
- 30 to 40 min at 70°F
- Weight
- 18.6 lb
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
Everflow · Countertop Epoxy
Everflow EF-191
100% Solids Countertop Epoxy Kit
EF-191 is a 100% solids, two-component countertop epoxy that self-levels to a glass-clear, high-gloss finish and pours up to 1/4 inch thick in one application. It is tough and clear at 8,500 psi tensile and under 50 g/L VOC, and when properly mixed and cured it meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact.
$175.00
Big job or contractor pricing? Request a quote
- Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
- Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy
New customer? Get 10% off your first order
- CFIA Direct Food Contact Meets CFIA requirements for direct food contact when mixed and cured properly
- LEED v4 Low-Emitting SCAQMD Method 304-91
- Low VOC (<50 g/L) Low VOC (<50 g/L)
- ASTM Tested Full test data on the TDS
- Family-Run Since 2004 20+ years in the trade
At a glance
Everflow EF-191
EF-191 is Everflow's 100% solids countertop epoxy, a two-component, crystal-clear coating that self-levels to a glass-smooth, high-gloss finish on kitchen counters, bar tops, and live-edge slabs. Built for fabricators and hands-on pros, it pours up to 1/4 inch thick in a single application and, when properly mixed and cured, meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact.
Previously sold as MPC-191. Identical formula, now under the Everflow name.
100%
SOLIDS
Zero shrink, full build
92.8
GU GLOSS
Glass-clear clarity
8,500
PSI
Tensile strength
1/4"
POUR DEPTH
In a single application
What makes it work
Built for kitchen counters and live-edge art
Glass-clear, self-leveling finish
Low mixed viscosity flows out smooth and releases air, so you get fewer bubbles and a flawless 92.8 GU high-gloss clear coat.
Meets direct and indirect food-contact requirements
When properly mixed and cured, EF-191 meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact, suited to counters, bar tops, butcher blocks, and charcuterie boards.
Pour up to 1/4 inch thick
Build a deep, glossy coat in one pour, or spread thinner to stretch coverage across a larger top.
Tough and clear under daily use
8,500 psi tensile, 6,200 psi compressive, 75 to 80 Shore D, and strong abrasion resistance keep the surface clear and scratch resistant.
Simple to apply
Roll on with a 10 mm roller and pass a torch over the surface to pop residual bubbles; seal porous substrates first.
Planning the job
Coverage and cure.
Per 2-gallon kit, by pour thickness.
1/16 inch
50
sq ft per kit
1/8 inch
26
sq ft per kit
1/4 inch
12
sq ft per kit
Cure at 68°F
Working time 30 to 40 min at 70°F18 to 24 hrRecoat
About 1 dayLight handling
About 7 daysFull cure
Warmer temperatures speed this up; cooler temperatures slow it down.
PHYSICAL AND CHEMISTRY
| Solids content | 100% by weight |
| Chemistry | 2-component epoxy, clear |
| Finish / gloss | 92.8 GU at 60 degrees, high-gloss clear |
| Color | Clear, tintable with pigment packs |
| Viscosity | Part A 11,500 to 12,500 cps, Part B 550 to 650 cps |
MECHANICAL
| Tensile strength | 8,500 psi (ASTM D638) |
| Compressive strength | 6,200 psi (ASTM D695) |
| Hardness | 75 to 80 Shore D (ASTM D2240) |
| Taber abrasion | 0.1 g loss (CS-17, ASTM D4060) |
| Pull-off adhesion | Over 363 psi, substrate failure (ASTM D7234) |
APPLICATION AND CURE
| Mix ratio | 1 to 1 by volume (3.78 L resin A, 3.78 L hardener B) |
| Coverage | 12 sq ft at 1/4 inch, 26 sq ft at 1/8 inch, 50 sq ft at 1/16 inch per 2-gallon kit |
| Max thickness | 1/4 inch per application |
| Working time | 30 to 40 min at 70 degrees F, 50% RH |
| Cure at 68 degrees F | Recoat 18 to 24 hr, foot about 1 day, full about 7 days |
| Application | 10 mm roller, torch out bubbles, seal porous material first |
COMPLIANCE
| VOC | Under 50 g/L (LEED v4 low-emitting, SCAQMD 304-91) |
| Food contact | Meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact |
| Shelf life | 1 year unopened, store 59 to 86 degrees F |
Kit to floor
Build the complete system.
What comes in the box, and what goes under and over it. Add any step to your cart from here.
In the kit
- 2-gallon kit: 3.78 L clear resin (Part A) plus 3.78 L hardener (Part B)
- Pre-measured 1 to 1 mix ratio by volume
- Clear base, tintable with pigment packs, sold separately
Pairs with
Tint EF-191 with Latux pigment packs for a solid or custom color, seal porous wood or stone with a thin coat first, and finish outdoor or sun-exposed pieces with a UV-stable topcoat, since epoxy can amber under prolonged UV.
1Prep the slab
Everflow EF-160
$192.00Sold out
2Base coat
You are here
Everflow EF-191
$175.00This item
3Add a lookoptional
4Topcoatfor UV or extra gloss
Everflow EF-275
$199.00Sold out
5Tools
Latux Flat Squeegee
$35.00
What can I use EF-191 on?
It's designed for kitchen and bathroom countertops, butcher blocks, bar tops, tabletops, river tables, and charcuterie boards, anywhere you want a clear, durable, high-gloss epoxy surface.
Is EF-191 food-safe?
When properly mixed and cured, EF-191 meets CFIA requirements for direct food contact, and CFIA and USDA requirements for indirect food contact and use in food plants, which covers counters, bar tops, butcher blocks, and charcuterie boards. Because results depend on correct mixing and curing by the user, each finished application should be assessed individually.
How thick can I pour it?
Up to 1/4” (250 mils) per application. A 2-gallon kit covers about 12 sq ft at 1/4”, 26 sq ft at 1/8”, or 50 sq ft at 1/16”.
How do I get a clear, bubble-free finish?
Mix Part A and Part B for no more than 1 minute on a low-speed drill to limit air entrapment, roll on with a fine 10 mm roller, then pass a torch lightly over the surface to pop residual bubbles. Seal very porous substrates with a thin coat first.
How long until it cures?
At 68°F you can recoat in 18 to 24 hours and handle the surface in about a day. Full chemical cure takes roughly 7 days. Wait for full cure before heavy daily use. Protect it from moisture and water for the first 48 hours.
Will EF-191 turn yellow?
As an epoxy, it will amber under prolonged direct UV exposure. For pieces in strong sunlight, keep them shaded or apply a UV-stable topcoat over the cured epoxy.
What is the working time after mixing?
About 30 to 40 minutes at 70°F. Pour and spread promptly, and never leave mixed product sitting in the bucket. It will heat up and set quickly.
How is EF-191 different from EF-195 casting resin?
EF-191 is a countertop coating for pours up to 1/4”, counters, bar tops, and tabletops. EF-195 is a low-exotherm deep-pour casting system for thick castings and river tables where you need to pour in much deeper lifts.
Recently viewed
