More in LatuxView all
Metallic Epoxy Pigment (160 Grams)Epoxy Pigments
LTX-800 Metallic Epoxy Pigment (50 Grams)Epoxy Pigments
Home and Industrial Flakes for Basement, Shop, and Garage Floors, 25-Pound BoxEpoxy Flakes
Solid Tone Liquid Pigment Pods: Pro Series ColorsEpoxy Pigments
Flat SqueegeeAccessories
LTX-100Epoxy Floor Coatings
LTX MasterclassTraining
MONEY COAT™ CLEAREpoxy Kits
Home and Industrial Flakes for Basement, Shop, and Garage Floors, 40-Pound BoxEpoxy Flakes
Spike Shoes (Epoxy Installer Cleats)Accessories
Nitrile 5 Mil Black Industrial GlovesAccessories
Turbo Supreme Diamond Cup Wheel for Concrete Prep (5 in. and 7 in.)Cup wheels
Latux · Grams)
At a glance
- SKU
- LTX-802-SILVER-PEARL-160G
- Vendor
- Latux
- Size
- 160 g per pod
- Dose
- 1 pod per 3-gallon kit
- Format
- pearlescent metallic powder
- Coverage
- 1 pod per 3-gal kit
- Weight
- 0.65 lb
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
Latux · Epoxy Pigments
Metallic Epoxy Pigment (160 Grams)
5.0 · 2 reviewsThis 160 gram metallic epoxy pigment pod is pre-measured to tint a full 3-gallon kit of clear 100% solids epoxy base coat for a consistent pearlescent load every time. The premium powder builds a deep, light-catching metallic effect and comes in a wide range of colors.
$40.00
Color 802 SILVER PEARL
Big job or contractor pricing? Request a quote
- Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
- Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy
New customer? Get 10% off your first order
- Lightfast and Heat Stable Lightfast and Heat Stable
- Family-Run Since 2004 20+ years in the trade
At a glance
Metallic Epoxy Pigment (160 Grams)
Metallic Epoxy Pigment is a pre-measured 160 gram pearlescent pigment pod that tints a full 3-gallon kit of clear 100% solids epoxy base coat, so every batch carries the same metallic load with no scale and no guesswork. This pearlescent pigment builds a deep, light-catching metallic effect for residential and commercial decorative floors.
Recommended ratio: for every 3-gallon kit, use 1 (160g) pod of metallic pigment. On EF-Masterflow, which is a 4-gallon kit, use 1 pod per kit, from 160 g up to 210 g for a denser metallic.
160 g
PER POD
Pre-measured dose
1
POD PER 3-GAL KIT
Tints a full 3-gallon kit
Multiple
COLORS
Pearlescent palette
100%
SOLIDS READY
Any clear base coat
What makes it work
One pod, one 3-gallon kit, consistent color
Pre-measured for a 3-gallon kit
One pod tints a full 3-gallon kit of clear epoxy base coat, with no weighing and no over-loading.
Premium pearlescent pigment
A fine particle size builds deep, light-catching 3D metallic effects in the finished floor.
Consistent color per job
Removes pigment-load variation between mixes on a multi-kit pour, so the floor reads uniform.
Works with your base coat
Compatible with EF-Masterflow, PPC Epoxy 100, and any 100% solids clear base coat.
PIGMENT
| Format | Pre-measured pearlescent metallic powder pod |
| Size | 160 g per pod |
| Colors | Multiple pearlescent shades. See the color chart in the Documents section below. |
DOSAGE AND SYSTEMS
| Dosage, 3-gallon kit | 1 (160g) pod per 3-gallon kit of clear epoxy base coat |
| Dosage, EF-Masterflow | EF-Masterflow is a 4-gallon kit: 1 pod per kit, from 160 g up to 210 g |
| Compatible systems | EF-Masterflow, PPC Epoxy 100, and 100% solids clear base coats |
Kit to floor
Build the complete system.
What comes in the box, and what goes under and over it. Add any step to your cart from here.
Pairs with
Dose it into a clear base coat like EF-Masterflow or PPC Epoxy 100, then seal the finished metallic floor with a UV-stable polyaspartic topcoat.
1Base coat
Everflow EF-100
$179.99
EF-Masterflow
$225.00
2Add a lookoptionalYou are here
Metallic Epoxy Pigment (160 Grams)
$40.00This item
3Topcoatfor UV or extra gloss
Everflow EF-275
$199.00
How much epoxy does one pod tint?
One 160 gram pod tints a full 3-gallon kit of clear 100% solids epoxy base coat.
How many pods do I need?
One pod per 3-gallon kit. If your floor takes two kits, order two pods.
How much does EF-Masterflow take?
EF-Masterflow is a 4-gallon kit. Use one 160 gram pod per kit, and load from 160 grams up to 210 grams for a denser, more opaque metallic.
Which base coats is it compatible with?
EF-Masterflow, PPC Epoxy 100, and any 100% solids clear base coat.
What colors are available?
Multiple pearlescent shades. See the color chart in the Documents section below.
Why a pre-measured pod?
It removes pigment-load variation between mixes on a multi-kit pour, so the floor reads uniform, with no weighing.
What finish does it create?
A deep, light-catching pearlescent metallic effect.
What topcoat should I use?
Seal the finished metallic floor with a UV-stable polyaspartic topcoat.
Recently viewed
Complete the system
M
The metallic pigments are beautiful. The colors are rich, vibrant, and really come alive once they’re mixed into the epoxy. They create a lot of movement and depth without looking muddy, and the finished designs have such a high-end look.
E
Amazing selection of colors! My customer wasn’t sure how to explain the look he was going for until he had a chance to see the color options you have. He honestly thought there was only a handful of colors to choose from until I walked him through the color selection you have. It helped me sell the job so much easier and left the home owner confident and happy to know what he was getting. Thank you, LATUX Epoxy!
