More in Epoxy Floor CoatingsView all
EF-100Epoxy Floor Coatings EF-280Polyaspartic Top Coats PPC Epoxy 100 Clear 100% Solids Epoxy Floor Coating (3-Gal Kit)Epoxy Floor Coatings EF-MasterflowEpoxy Kits LTX-100Epoxy Floor Coatings EF-135Crack Filler EF-100 Pour-Ready KitEpoxy Floor Coatings MONEY COAT™ CLEAREpoxy Kits EF-150Epoxy Floor Coatings EF-155Epoxy Floor Coatings EF-191Countertop Epoxy EF-195Deep Pour Epoxy
Everflow · KitEverflow EF-100 100% solids epoxy floor coating kit with tools, 3 gallon

At a glance

SKU
EF-100-BDL-CLR-FULL
Vendor
Everflow
Solids
100%
Compressive
6,200 psi
Includes
Full tool set
Coverage
150–200 sq ft base coat; 480–600 as primer (3 gal)
Working time
30 to 40 min at 70°F
WarrantyIf a product is defective or does not perform to its published specs, we replace it. Limited Warranty
Technical helpMix ratios, install questions, job-site troubleshooting. Mon to Fri, 8 to 5 EST.Contact a pro
Everflow · Epoxy Floor Coatings
Email Facebook Pinterest WhatsApp

Everflow EF-100 Pour-Ready Kit

Epoxy Floor Kit With Tools (3 Gal)

The EF-100 epoxy floor coating kit with the applicators packed in, so the pour is not waiting on a hardware run. A 3-gallon, 100% solids self-leveling epoxy that covers 150 to 200 sq ft as a base coat, plus the 18 inch Pro Performance woven roller, Big Ben frame, 20 inch flat squeegee, silicone mixing paddle, and spike shoes that put it down flat.

$269.99
Color Clear (Transparent)

Big job or contractor pricing? Request a quote

  • Free UPS Ground on orders $150+, or free pickup in Pompano Beach, FL
  • Free replacement if your order arrives damaged or we ship the wrong item. Let us know within 48 hours of delivery with photos. Replacement Policy

New customer? Get 10% off your first order

  • CFIA / USDA Indirect Food Contact Meets CFIA and USDA requirements for indirect food contact
  • LEED v4 Low-Emitting SCAQMD Method 304-91
  • Low VOC (<50 g/L) Low VOC (<50 g/L)
  • ASTM Tested Full test data on the TDS
  • 0 Flame Spread (CAN/ULC S102.2) 0 Flame Spread (CAN/ULC S102.2)
  • Family-Run Since 2004 20+ years in the trade
At a glance

Everflow EF-100 Pour-Ready Kit

EF-100 With Tools pairs the Everflow 100% solids epoxy floor coating kit with the applicators the pour actually needs, so a garage floor or a shop bay goes down in one trip instead of three. It is the same 3-gallon, 2-component self-leveling epoxy floor kit that covers 150 to 200 sq ft as a base coat, packed with the 18 inch Pro Performance woven roller, Big Ben frame, 20 inch flat squeegee, silicone mixing paddle, and spike shoes crews use to mix it, spread it and back-roll it.

100%
SOLIDS
Zero shrink, full build
6,200
PSI
Compressive strength
150-200
SQ FT PER KIT
Base coat, 3-gallon kit
93.2
GU GLOSS
High-gloss at 60 degrees
What makes it work

One box, one trip, one pour

Black, white and grey epoxy flake garage floor with a glossy finish and matching flake cove base
Resin and tools ship together
Once Part B goes into Part A you have 30 to 40 minutes. Having the roller, frame, and squeegee already on site is the difference between a flat floor and a ruined batch.
100% solids, self-leveling
Flows out smooth and high-build with no shrinkage, so one product handles coating, priming, patching, and resurfacing.
Heavy-duty mechanicals
6,200 psi compressive, 5,500 psi tensile, 80 to 85 Shore D, and 0.1 g Taber abrasion loss stand up to industrial traffic.
Coverage you can plan a job around
Plan on 150 to 200 sq ft per 3-gallon kit as a base coat. As a primer at 8 to 10 mils it stretches to 480 to 600 sq ft; as a metallic coat, 100 to 150 sq ft.
Cycloaliphatic clarity
The cycloaliphatic formula reduces the water spotting and amine blushing that cloud ordinary epoxies, for a cleaner, more consistent cure.
Low VOC and food-plant rated
Under 50 g/L VOC with Class A fire performance, 0 flame spread and 15 smoke developed, and it meets requirements for indirect food contact.
Planning the job

Coverage and cure.

Per 3-gallon kit. Real coverage depends on concrete porosity and the profile of the slab.

Primer8 to 10 mils
480–600
sq ft per kit
Base coat
150–200
sq ft per kit
Metallic coat
100–150
sq ft per kit

Cure at 68°F

Working time 30 to 40 min at 70°F
18 to 24 hrRecoat
About 1 dayFoot traffic
About 2 daysVehicle traffic
About 7 daysFull cure

Warmer temperatures speed this up; cooler temperatures slow it down. Recoat within 48 hours or sand the previous coat first.

KIT AND TOOLS
Coating kit 3-gallon, 7.56 L resin A plus 3.78 L hardener B
Mix ratio 2 to 1 by volume, pre-measured
Roller cover Pro Roller Pro Performance 18 in woven, 3/8 in nap, with end caps
Roller frame Wooster Big Ben 18 in
Squeegee Latux 20 in flat squeegee
Mixing paddle Silicone mixing paddle
Spike shoes Installer cleats, one universal size
PHYSICAL AND CHEMISTRY
Solids content 100% by weight
Chemistry Cycloaliphatic epoxy, 2-component
Finish / gloss 93.2 GU at 60 degrees
Color Clear, white, light grey, black
MECHANICAL
Compressive strength 6,200 psi (ASTM D695)
Tensile strength 5,500 psi (ASTM D638)
Elongation at break 5% (ASTM D638)
Hardness 80 to 85 Shore D (ASTM D2240)
Taber abrasion 0.1 g loss (CS-17, ASTM D4060)
Pull-off adhesion Over 363 psi, substrate failure (ASTM D7234)
Slip resistance (DCOF) About 0.42 wet, 0.92 dry (ASTM E303-93)
Fire (CAN/ULC S102.2) 0 flame spread, 15 smoke developed
APPLICATION AND CURE
Coverage Primer 8 to 10 mils, 480 to 600 sq ft; base coat 150 to 200 sq ft; metallic coat 100 to 150 sq ft (3-gallon kit)
Working time 30 to 40 min at 70 degrees F, 50% RH
Cure at 68 degrees F Recoat 18 to 24 hr, foot about 1 day, vehicle about 2 days, full about 7 days
Surface prep Diamond grind concrete to ICRI CSP-2
Application Pour, spread with the squeegee, back-roll with the 18 in roller
COMPLIANCE
VOC Under 50 g/L (LEED v4, SCAQMD 304-91)
Food contact Meets requirements for indirect food contact
Shelf life 1 year unopened, store 59 to 86 degrees F
Kit to floor

Build the complete system.

What comes in the box, and what goes under and over it. Add any step to your cart from here.

In the kit

  • EF-100 3-gallon kit: 7.56 L resin (Part A) plus 3.78 L hardener (Part B), pre-measured 2 to 1 by volume
  • Pro Roller Pro Performance 18 in woven roller cover, 3/8 in nap, with end caps
  • Wooster Big Ben 18 in roller frame
  • Latux 20 in flat squeegee for spreading the pour
  • Silicone mixing paddle for mixing Part A and Part B
  • Spike shoes so you can walk the wet film without leaving prints, one universal size
  • Four colors: clear, white, light grey, and black

Make it your color

Start with the clear kit and tint it yourself. Mix in any Latux metallic pigment for a metallic floor, or a solid tone liquid pigment pod for a custom solid color.

Pairs with

Add a Latux metallic or solid tone pigment pod to turn the clear kit into a decorative floor. Finish with an Everflow polyaspartic or urethane topcoat such as EF-275 or EF-290 when you need extra gloss or UV stability. Diamond grind the slab to ICRI CSP-2 first, and run a moisture vapor barrier on any slab with high vapor emission.

1Base coat You are here
Everflow EF-100 Pour-Ready Kit
$269.99This item
2Add a lookoptional
Latux 160 gram metallic epoxy pigment pod for floor coatings
Metallic Epoxy Pigment (160 Grams)
$40.00
Latux Solid Tone liquid pigment pods, Pro Series colors
Solid Tone Liquid Pigment Pods: Pro Series Colors
$45.00
3Topcoatfor UV or extra gloss
Everflow EF-275 solvent based polyaspartic coating, 2 gallon kit
Everflow EF-275
$199.00
Everflow EF-280 polyaspartic coating kit, 3 gallon
Everflow EF-280
$299.00
What tools come in the kit?

Every kit includes the Pro Roller Pro Performance 18 inch woven roller cover in a 3/8 inch nap with end caps, the Wooster Big Ben 18 inch frame, the Latux 20 inch flat squeegee, a silicone mixing paddle, and spike shoes in one universal size so you can walk the wet film without leaving prints.

Do I still need anything else to install the floor?

You will need a drill, a diamond grinder or rental to profile the slab to ICRI CSP-2, and an extension pole for the roller frame. The silicone mixing paddle is included. Gloves and a mixing bucket are worth adding. The kit covers the applicators, not the prep equipment.

How much floor will one kit cover?

A 3-gallon kit covers 150 to 200 sq ft as a base coat, stretches to 480 to 600 sq ft as a primer (8 to 10 mils), and covers 100 to 150 sq ft as a metallic coat, depending on concrete porosity and the profile of the slab.

What is the working time after mixing?

About 30 to 40 minutes at 70 degrees F and 50% humidity. Mix Part B into Part A for no more than 1 minute on a low-speed drill, then pour immediately. Never let mixed product sit in the bucket, as it will heat up and cure fast.

How long until I can walk or drive on it?

At 68 degrees F you can recoat in 18 to 24 hours, return light foot traffic in about a day, and vehicle traffic in roughly two days. Full chemical cure takes about 7 days. Warmer speeds this up, cooler slows it down. Recoat within 48 hours or sand the previous coat first.

Can I use this kit for a metallic floor?

Yes. Take the clear kit and add a Latux metallic pigment pod. The spike shoes in the kit let you walk the wet coat, and a spiked de-airing roller also helps on a full metallic system.

Is EF-100 UV stable?

As an epoxy, EF-100 will discolor under prolonged UV exposure. For sunlit, outdoor, or high-light areas, finish it with an Everflow UV-stable polyaspartic or urethane topcoat such as EF-275 or EF-290.

Complete the system